| Előző téma megtekintése :: Következő téma megtekintése |
| Szerző |
Üzenet |
piticu
 Csatlakozott: 2008.08.04. Hétfő 10:29 Hozzászólások: 591 Tartózkodási hely: Romania
|
 Elküldve: Szomb. Aug. 30, 2008 2:01 pm Hozzászólás témája: Servicing a Volna-3 |
|
 Elküldve: Szomb. Aug. 30, 2008 2:01 pm Hozzászólás témája: Servicing a Volna-3 |
|
|
piticu wrote:
I've had a full of dust and fungus Volna-3 and I wanted to remove the aperture (the lens is part of a custom home made tilt and shift). I dismantled it quite easily, cleaned the lenses with a ammonia based solution, cleaned and relubricate the helix and put it back togheter. It took around 3 hours all together.
Volna-3 at f2.8
Helios 44M at f2
Nikkor 50mm at f1.4
 _________________ www.atelierelealbe.eu
A hozzászólás legutóbb piticu által Szomb. Aug. 30, 2008 6:29 pm-kor lett szerkesztve, összesen 1 alkalommal. |
|
| Vissza az elejére |
|
 |
maddog10
 Csatlakozott: 2008.04.08. Kedd 23:06 Hozzászólások: 1072 Tartózkodási hely: Maryland, USA
Expire: 2015-02-12
|
 Elküldve: Szomb. Aug. 30, 2008 2:10 pm Hozzászólás témája: |
|
 Elküldve: Szomb. Aug. 30, 2008 2:10 pm Hozzászólás témája: |
|
|
maddog10 wrote:
I am pretty sure I could take it apart, it's the rebuilding I would have trouble with.
Did you take photos of the entire process, I would like to see them. _________________ Michael Hill |
|
| Vissza az elejére |
|
 |
piticu
 Csatlakozott: 2008.08.04. Hétfő 10:29 Hozzászólások: 591 Tartózkodási hely: Romania
|
 Elküldve: Szomb. Aug. 30, 2008 2:23 pm Hozzászólás témája: |
|
 Elküldve: Szomb. Aug. 30, 2008 2:23 pm Hozzászólás témája: |
|
|
piticu wrote:
| maddog10 írta: |
| I am pretty sure I could take it apart, it's the rebuilding I would have trouble with. |
Tell me about it… I was like „OK, now what?“
| maddog10 írta: |
| Did you take photos of the entire process, I would like to see them. |
Noooo I was too focused on the job to think about taking pictures. But the next time I will, that's a promise. _________________ www.atelierelealbe.eu |
|
| Vissza az elejére |
|
 |
LucisPictor
 Csatlakozott: 2007.02.26. Hétfő 21:40 Hozzászólások: 17633 Tartózkodási hely: Oberhessen, Germany / Maidstone ('95-'96)
Expire: 2013-12-03
|
 Elküldve: Szomb. Aug. 30, 2008 4:07 pm Hozzászólás témája: Re: Servicing a Volna-3 |
|
 Elküldve: Szomb. Aug. 30, 2008 4:07 pm Hozzászólás témája: Re: Servicing a Volna-3 |
|
|
LucisPictor wrote:
| piticu írta: |
I've had a full of dust and fungus Volna-3 and I wanted to remove the aperture (the lens is part of a custom home made tilt and shift). I dismantled it quite easily, cleaned the lenses with a ammonia based solution, cleaned and relubricate the helix and put it back togheter. It took around 3 hours all together.
|
And you got a working lens out of this? Well done! _________________ Personal forum activity on pause every now and again (due to job obligations)!
Carsten, former Moderator
Things ON SALE
Carsten = "KAPCTEH" = "Karusutenu" | T-shirt?.........................My photos from Emilia: http://www.schouler.net/emilia/emilia2011.html
My gear: http://retrocameracs.wordpress.com/ausrustung/
Old list: http://forum.mflenses.com/viewtopic.php?t=65 (Not up-to-date, sorry!) | http://www.lucispictor.de | http://www.alensaweek.wordpress.com |
http://www.retrocamera.de |
|
| Vissza az elejére |
|
 |
sichko
 Csatlakozott: 2008.06.20. Péntek 20:21 Hozzászólások: 2475 Tartózkodási hely: South West UK
|
 Elküldve: Szomb. Aug. 30, 2008 7:26 pm Hozzászólás témája: |
|
 Elküldve: Szomb. Aug. 30, 2008 7:26 pm Hozzászólás témája: |
|
|
sichko wrote:
You have my admiration piticu. I hope to get a Volna 3 in the near future. I expect that I shall have to clean and regrease the helicoids. But I hope that I don't have to go as far as you.
I note your point about not taking photographs. When I take a lens apart for the first time I like to get a complete mental picture of the construction. Although I take copious written notes, and make sketches, photographs are a distraction. _________________ John |
|
| Vissza az elejére |
|
 |
Jesito
 Csatlakozott: 2007.08.24. Péntek 1:03 Hozzászólások: 5745 Tartózkodási hely: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Elküldve: Szomb. Aug. 30, 2008 7:35 pm Hozzászólás témája: |
|
 Elküldve: Szomb. Aug. 30, 2008 7:35 pm Hozzászólás témája: |
|
|
Jesito wrote:
Congrats, Piticu!!
Nice work, I'd love to see a step by step tutorial on it...
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Vissza az elejére |
|
 |
piticu
 Csatlakozott: 2008.08.04. Hétfő 10:29 Hozzászólások: 591 Tartózkodási hely: Romania
|
 Elküldve: Szomb. Aug. 30, 2008 7:55 pm Hozzászólás témája: |
|
 Elküldve: Szomb. Aug. 30, 2008 7:55 pm Hozzászólás témája: |
|
|
piticu wrote:
I'd love that too
All I did was to unscrew every tiny screw, starting from bottom up. I stuck a little bit on top lens because the cover ring has no holes in it. And then I remembered i saw some rubber tools somewhere and so I used a piece of an old mouse pad who's under side is very sticky.
For my first lens dismantle i think i managed it well. _________________ www.atelierelealbe.eu |
|
| Vissza az elejére |
|
 |
thehive1
Csatlakozott: 2008.10.19. Vasárnap 5:56 Hozzászólások: 8
|
 Elküldve: Vas. Okt. 19, 2008 6:06 am Hozzászólás témája: congrats and help |
|
 Elküldve: Vas. Okt. 19, 2008 6:06 am Hozzászólás témája: congrats and help |
|
|
thehive1 wrote:
Hi! This is Paris, from Mexico.
Congratulations for your success!
Today i got a Volna-3 lens and i want to clean it. I'm making a tilt-shift lens too.
It would be great if you could provide the dismantelation process. |
|
| Vissza az elejére |
|
 |
piticu
 Csatlakozott: 2008.08.04. Hétfő 10:29 Hozzászólások: 591 Tartózkodási hely: Romania
|
 Elküldve: Vas. Okt. 19, 2008 7:34 am Hozzászólás témája: |
|
 Elküldve: Vas. Okt. 19, 2008 7:34 am Hozzászólás témája: |
|
|
piticu wrote:
Ola amigo
Unfortunately i didn't record the steps but it's not big deal: keep removing screws and rings until everything is on your table
Good luck and keep up inform about the process, ok? _________________ www.atelierelealbe.eu |
|
| Vissza az elejére |
|
 |
thehive1
Csatlakozott: 2008.10.19. Vasárnap 5:56 Hozzászólások: 8
|
 Elküldve: Vas. Okt. 19, 2008 7:26 pm Hozzászólás témája: |
|
 Elküldve: Vas. Okt. 19, 2008 7:26 pm Hozzászólás témája: |
|
|
thehive1 wrote:
Thanks for your quick reply!
I'll try it, and i'll take pictures of the disassembly process, so i could go back on my steps. If I have some trouble, I'll ask for your help.
Thanks again. |
|
| Vissza az elejére |
|
 |
Throndor
 Csatlakozott: 2008.09.15. Hétfő 9:57 Hozzászólások: 157 Tartózkodási hely: Ankara / TURKEY
|
 Elküldve: Vas. Okt. 19, 2008 9:50 pm Hozzászólás témája: |
|
 Elküldve: Vas. Okt. 19, 2008 9:50 pm Hozzászólás témája: |
|
|
Throndor wrote:
Is the Volna-3 known for its appropriateness to turn into a tilt-shift or is it just a coincidence that both you guys have used/will use it for that matter.. _________________ Omer
Pentax K100D super
Pentax DA 18-55 AL
Pentax SMC-FA 50 f/1.4
Aus Jena Pancolar 50/1.8 (Zebra)
Carl Zeiss Jena Sonnar 135/3.5
Varexon 35/2.8
Helios 44-2 58/2
|
|
| Vissza az elejére |
|
 |
piticu
 Csatlakozott: 2008.08.04. Hétfő 10:29 Hozzászólások: 591 Tartózkodási hely: Romania
|
 Elküldve: Vas. Okt. 19, 2008 10:01 pm Hozzászólás témája: |
|
 Elküldve: Vas. Okt. 19, 2008 10:01 pm Hozzászólás témája: |
|
|
piticu wrote:
Me, I was just looking for any medium format lens and this one was that first that i got. For free, from a friend—it wasn't quite fungus and scratch free though  _________________ www.atelierelealbe.eu |
|
| Vissza az elejére |
|
 |
thehive1
Csatlakozott: 2008.10.19. Vasárnap 5:56 Hozzászólások: 8
|
 Elküldve: Vas. Okt. 19, 2008 11:15 pm Hozzászólás témája: |
|
 Elküldve: Vas. Okt. 19, 2008 11:15 pm Hozzászólás témája: |
|
|
thehive1 wrote:
I was just looking for any medium format lens, too.
There's a street on Mexico City's downtown where there are a lot of photography stores.
I was lucky. I found it in a little store of used equipment. I bought it for more or less $18 dollars. |
|
| Vissza az elejére |
|
 |
thehive1
Csatlakozott: 2008.10.19. Vasárnap 5:56 Hozzászólások: 8
|
 Elküldve: Vas. Okt. 19, 2008 11:39 pm Hozzászólás témája: |
|
 Elküldve: Vas. Okt. 19, 2008 11:39 pm Hozzászólás témája: |
|
|
thehive1 wrote:
Piticu:
I tried disassembling the lens. I didn't fully disassemble it, now i got a problem. Hope you could tell me: which is the right order or the right way to assemble the following parts?
Thanks! |
|
| Vissza az elejére |
|
 |
piticu
 Csatlakozott: 2008.08.04. Hétfő 10:29 Hozzászólások: 591 Tartózkodási hely: Romania
|
 Elküldve: Hétf. Okt. 20, 2008 8:14 am Hozzászólás témája: |
|
 Elküldve: Hétf. Okt. 20, 2008 8:14 am Hozzászólás témája: |
|
|
piticu wrote:
I don't know if it's a right order, sometimes there is only one way to assemble the lens, sometimes you can do it in many ways: just be creative
About your volna: i'd start cu no2 on no1, then no3 and finally the barrel. Watch for the two yellow "sticks" of no1 - they have to go precisely on the two tracks of no4.
I don't remember exactly how i did put it back - i was very excited and because of that i worked on "auto mode". But if you don't find a solution i'll open mine again, maybe i'll take some pics this time  _________________ www.atelierelealbe.eu |
|
| Vissza az elejére |
|
 |
thehive1
Csatlakozott: 2008.10.19. Vasárnap 5:56 Hozzászólások: 8
|
 Elküldve: Vas. Okt. 26, 2008 5:32 pm Hozzászólás témája: |
|
 Elküldve: Vas. Okt. 26, 2008 5:32 pm Hozzászólás témája: |
|
|
thehive1 wrote:
i haven't had time for trying to assemble my lens.
hope i had time later.
cheers from Mexico! |
|
| Vissza az elejére |
|
 |
thehive1
Csatlakozott: 2008.10.19. Vasárnap 5:56 Hozzászólások: 8
|
 Elküldve: Vas. Nov. 02, 2008 11:33 pm Hozzászólás témája: |
|
 Elküldve: Vas. Nov. 02, 2008 11:33 pm Hozzászólás témája: |
|
|
thehive1 wrote:
Hi Piticu!!!
It seems that i finally could assemble the lens. There are only 3 screws to place.
I just have to find the rubber plunger to build my tilt shift.
A question: do you have another example of photographs taken with yout tilt shif?
Thanks!
 |
|
| Vissza az elejére |
|
 |
piticu
 Csatlakozott: 2008.08.04. Hétfő 10:29 Hozzászólások: 591 Tartózkodási hely: Romania
|
 Elküldve: Hétf. Nov. 03, 2008 12:37 am Hozzászólás témája: |
|
 Elküldve: Hétf. Nov. 03, 2008 12:37 am Hozzászólás témája: |
|
|
piticu wrote:
ya, actually i just „improved“ the „design“ couple of days ago. i'll try to take some decent samples tomorrow and post them here but no promise. in the mean time you may want to check some old shots http://cezar.popescoo.net/main.php?g2_itemId=1898 _________________ www.atelierelealbe.eu |
|
| Vissza az elejére |
|
 |
thehive1
Csatlakozott: 2008.10.19. Vasárnap 5:56 Hozzászólások: 8
|
 Elküldve: Kedd. Nov. 11, 2008 4:14 am Hozzászólás témája: |
|
 Elküldve: Kedd. Nov. 11, 2008 4:14 am Hozzászólás témája: |
|
|
thehive1 wrote:
i tried to assemble the lens... but, i have some trouble... i can't make it work properly...
the rings don't do what they are supposed to do...
here's a little video of it
http://www.youtube.com/watch?v=iTSCqhuCYrg
your help will be appreciated
thanks!
cheers from Mexico |
|
| Vissza az elejére |
|
 |
thehive1
Csatlakozott: 2008.10.19. Vasárnap 5:56 Hozzászólások: 8
|
 Elküldve: Hétf. Nov. 17, 2008 5:24 pm Hozzászólás témája: question |
|
 Elküldve: Hétf. Nov. 17, 2008 5:24 pm Hozzászólás témája: question |
|
|
thehive1 wrote:
Hi Piticu!
Just a question: is this piece alright?
thanks! |
|
| Vissza az elejére |
|
 |
piticu
 Csatlakozott: 2008.08.04. Hétfő 10:29 Hozzászólások: 591 Tartózkodási hely: Romania
|
 Elküldve: Hétf. Nov. 17, 2008 8:41 pm Hozzászólás témája: |
|
 Elküldve: Hétf. Nov. 17, 2008 8:41 pm Hozzászólás témája: |
|
|
piticu wrote:
i don't remeber ANY bend piece inside that lens. that metal i guess should go inside the tracks you can see on the sides of your pic _________________ www.atelierelealbe.eu |
|
| Vissza az elejére |
|
 |
|
|