| Előző téma megtekintése :: Következő téma megtekintése |
| Szerző |
Üzenet |
arhi_tectu1
 Csatlakozott: 2009.02.09. Hétfő 18:58 Hozzászólások: 315
|
 Elküldve: Csüt. Ápr. 23, 2009 1:44 pm Hozzászólás témája: Metering problems |
|
 Elküldve: Csüt. Ápr. 23, 2009 1:44 pm Hozzászólás témája: Metering problems |
|
|
arhi_tectu1 wrote:
hi there
i have some problems with my camera metering when i use manual lenses
if i use them at full aperture there is no problem but if i go for f 5.6 or beyond the camera metering sis overexposes or underexposes never right(with every metering sis)
the problem appeared when my C/Y adapter chip broke down and i got an err 101(clean the lens contact's) or something like that after this i removed the chip .
can the chip adapter mess the camera metering system ? _________________ MF- CZJ 180/2.8@CZJ 50/2.8@Contax CZ 50/1.4@Contax CZ 135/2.8@Nikkor P 180/2.8@Helios 44@Mir 37/2.8@Industar 50/3.5@Pentacon 28/2.8@Pentacon 300/4
AF- Canon 70-200/4L@Canon 60/2.8Macro@Tokina 11-16/2.8
Camera Canon 40D |
|
| Vissza az elejére |
|
 |
martinsmith99
 Csatlakozott: 2008.08.31. Vasárnap 17:50 Hozzászólások: 7029 Tartózkodási hely: S Glos, UK
Expire: 2013-11-18
|
 Elküldve: Vas. Ápr. 26, 2009 1:00 pm Hozzászólás témája: |
|
 Elküldve: Vas. Ápr. 26, 2009 1:00 pm Hozzászólás témája: |
|
|
martinsmith99 wrote:
Is this on your 40D?
If so, what metering option are you using?
Do you have some examples to post?
I have some chipped and non chipped adapters and mine seems to meter ok with either. Can you test with another adapter? _________________ Casual attendance these days |
|
| Vissza az elejére |
|
 |
arhi_tectu1
 Csatlakozott: 2009.02.09. Hétfő 18:58 Hozzászólások: 315
|
 Elküldve: Vas. Ápr. 26, 2009 3:47 pm Hozzászólás témája: |
|
 Elküldve: Vas. Ápr. 26, 2009 3:47 pm Hozzászólás témája: |
|
|
arhi_tectu1 wrote:
yes is my 40D
the problem happens at all metering option's randomly.
it firs happened with my C/Y adapter when i started the camera i got an err
to clean my lens contact's after i did that the camera did start but the metering was going wild (like the camera did know what to do it was flickering between 1/8000 and 1/125 very very fast , so no shutter release
when i got home i decided to remove the chip) out of 5 img only 1 is exposed correctly
ill try to make a test and post them _________________ MF- CZJ 180/2.8@CZJ 50/2.8@Contax CZ 50/1.4@Contax CZ 135/2.8@Nikkor P 180/2.8@Helios 44@Mir 37/2.8@Industar 50/3.5@Pentacon 28/2.8@Pentacon 300/4
AF- Canon 70-200/4L@Canon 60/2.8Macro@Tokina 11-16/2.8
Camera Canon 40D |
|
| Vissza az elejére |
|
 |
martinsmith99
 Csatlakozott: 2008.08.31. Vasárnap 17:50 Hozzászólások: 7029 Tartózkodási hely: S Glos, UK
Expire: 2013-11-18
|
 Elküldve: Vas. Ápr. 26, 2009 5:31 pm Hozzászólás témája: |
|
 Elküldve: Vas. Ápr. 26, 2009 5:31 pm Hozzászólás témája: |
|
|
martinsmith99 wrote:
Do your other lenses work ok? I'm just trying to find out if it's a camera or chip fault. _________________ Casual attendance these days |
|
| Vissza az elejére |
|
 |
aoleg
 Csatlakozott: 2008.02.22. Péntek 7:38 Hozzászólások: 1387 Tartózkodási hely: Berlin, DE
|
 Elküldve: Hétf. Ápr. 27, 2009 3:59 am Hozzászólás témája: |
|
 Elküldve: Hétf. Ápr. 27, 2009 3:59 am Hozzászólás témája: |
|
|
aoleg wrote:
The problem is well-known for the 40D and other Canon 1.6x crop cameras. All of my lenses behaved exactly as you described on my 40D: more or less normal metering wide open and severe overexposure stopped down. Apparently, AF confirmation chips partially mitigated the problem (e.g. I was still getting overexposure on most lenses, but not by as much as without the chip).
This is believed to happen because of the larger circle of light produced by 35mm lenses than required to cover the cropped sensor; there've been reports on people who managed to fix the problem completely by putting something at the back of the lens to reduce the light circle. Have a look at http://www.penta-club.ru/forum/index.php?showtopic=41859 (it's in Russian but there are lots of pics so it is easy to understand what has been done and what has been achieved).
That said, full-frame cameras (e.g. Canon's 5D and 5D mkII) do not exhibit this behavior with manual lenses, with or without the chip. _________________ List of lenses |
|
| Vissza az elejére |
|
 |
ManualFocus-G
 Csatlakozott: 2008.12.29. Hétfő 13:52 Hozzászólások: 6675 Tartózkodási hely: United Kingdom
Expire: 2014-11-24
|
 Elküldve: Hétf. Ápr. 27, 2009 11:06 am Hozzászólás témája: |
|
 Elküldve: Hétf. Ápr. 27, 2009 11:06 am Hozzászólás témája: |
|
|
ManualFocus-G wrote:
That's a smart idea.
With the risk of hijacking the thread, does anyone have any suggestions as to how to stop my Sony alphas UNDER exposing past f5.6?
Thanks _________________ Graham
Shooter of choice: Nikon Z6
Lenses:
Vivitar presets
Soligor autos
Pentacon presets
Prakticar PBs
Some other weird stuff!
|
|
| Vissza az elejére |
|
 |
arhi_tectu1
 Csatlakozott: 2009.02.09. Hétfő 18:58 Hozzászólások: 315
|
 Elküldve: Hétf. Ápr. 27, 2009 12:57 pm Hozzászólás témája: |
|
 Elküldve: Hétf. Ápr. 27, 2009 12:57 pm Hozzászólás témája: |
|
|
arhi_tectu1 wrote:
today i had done some test's an i have the same problem only when i go past f 5.6 to f 8 the camera (canon 40D) overexposes.
is this a normal behavior for DSLR'S when used with manual lenses ??
what i want to ask is everybody that uses crop sensors experiences the same problem as aoleg said?
by the way thanks aoleg i was thinking that my camera is broken
thanks everybody _________________ MF- CZJ 180/2.8@CZJ 50/2.8@Contax CZ 50/1.4@Contax CZ 135/2.8@Nikkor P 180/2.8@Helios 44@Mir 37/2.8@Industar 50/3.5@Pentacon 28/2.8@Pentacon 300/4
AF- Canon 70-200/4L@Canon 60/2.8Macro@Tokina 11-16/2.8
Camera Canon 40D |
|
| Vissza az elejére |
|
 |
Carlsson
 Csatlakozott: 2008.07.26. Szombat 22:50 Hozzászólások: 793 Tartózkodási hely: Portugal
|
 Elküldve: Hétf. Ápr. 27, 2009 1:36 pm Hozzászólás témája: |
|
 Elküldve: Hétf. Ápr. 27, 2009 1:36 pm Hozzászólás témája: |
|
|
Carlsson wrote:
This is my personal workaround, I use evaluative metering and set the exposure compensation two points in minus direction (manual page 93). Save this setting to C1, C2 or C3.
Activate the histogram, for better evaluation.
Hope this helps.
PS: changing the focussing screen to a manual katzeye screen helped alot, metering is much better now. _________________
Contax III, Zeiss Ikon ZM, Contax AX, EOS 5D, R-D1
https://mariaeero.com/contax/ |
|
| Vissza az elejére |
|
 |
poilu
 Csatlakozott: 2007.08.26. Vasárnap 11:56 Hozzászólások: 10476 Tartózkodási hely: Greece
Expire: 2019-08-29
|
 Elküldve: Hétf. Ápr. 27, 2009 1:59 pm Hozzászólás témája: |
|
 Elküldve: Hétf. Ápr. 27, 2009 1:59 pm Hozzászólás témája: |
|
|
poilu wrote:
distagon 28:2.8 without chip handeld on 40D
no exposure compensation on the 40D, untouched exposure in pp
I see more variation in auto WB than exposure
tip: I have the EE-s screen who is know to fix exposure problem
| Kód: |
2.8 1/250
4.0 1/125
5.6 1/80
8.0 1/40
11.0 1/20
16.0 1/10
|
 |
|
| Vissza az elejére |
|
 |
martinsmith99
 Csatlakozott: 2008.08.31. Vasárnap 17:50 Hozzászólások: 7029 Tartózkodási hely: S Glos, UK
Expire: 2013-11-18
|
 Elküldve: Hétf. Ápr. 27, 2009 2:14 pm Hozzászólás témája: |
|
 Elküldve: Hétf. Ápr. 27, 2009 2:14 pm Hozzászólás témája: |
|
|
martinsmith99 wrote:
I use evaluative metering and rarely have any problems. I have to give +or- EV to a few lenses, but only a small amout and the problem is uniform.
Maybe my focus screen selection is helping (the 3rd option, can't remember what it's called)? _________________ Casual attendance these days |
|
| Vissza az elejére |
|
 |
arhi_tectu1
 Csatlakozott: 2009.02.09. Hétfő 18:58 Hozzászólások: 315
|
 Elküldve: Hétf. Ápr. 27, 2009 3:21 pm Hozzászólás témája: |
|
 Elküldve: Hétf. Ápr. 27, 2009 3:21 pm Hozzászólás témája: |
|
|
arhi_tectu1 wrote:
thank you so much everybody
i think i will buy a katzeye screen and see if it resolved the problem
Thanks _________________ MF- CZJ 180/2.8@CZJ 50/2.8@Contax CZ 50/1.4@Contax CZ 135/2.8@Nikkor P 180/2.8@Helios 44@Mir 37/2.8@Industar 50/3.5@Pentacon 28/2.8@Pentacon 300/4
AF- Canon 70-200/4L@Canon 60/2.8Macro@Tokina 11-16/2.8
Camera Canon 40D |
|
| Vissza az elejére |
|
 |
greg
 Csatlakozott: 2009.03.21. Szombat 20:23 Hozzászólások: 683
Expire: 2012-12-03
|
 Elküldve: Hétf. Ápr. 27, 2009 4:06 pm Hozzászólás témája: |
|
 Elküldve: Hétf. Ápr. 27, 2009 4:06 pm Hozzászólás témája: |
|
|
greg wrote:
| aoleg írta: |
This is believed to happen because of the larger circle of light produced by 35mm lenses than required to cover the cropped sensor; there've been reports on people who managed to fix the problem completely by putting something at the back of the lens to reduce the light circle. Have a look at http://www.penta-club.ru/forum/index.php?showtopic=41859 (it's in Russian but there are lots of pics so it is easy to understand what has been done and what has been achieved).
|
Thank you for the link. From what I can gather, it looks as if it is the same type of result (not necessarily the same cause, I realize) as using a bare VPK Miniscus lens on a DSLR. Just the masking is at the rear of the lens rather than the front.
I will have to try it with my Canon f1.8 28mm that has a LOT of exposure and focusing problems on my XTi. It is a FF lens, perhaps this will help. Please forgive me for blaspheming on this MF forum.  |
|
| Vissza az elejére |
|
 |
Carlsson
 Csatlakozott: 2008.07.26. Szombat 22:50 Hozzászólások: 793 Tartózkodási hely: Portugal
|
 Elküldve: Hétf. Ápr. 27, 2009 5:42 pm Hozzászólás témája: |
|
 Elküldve: Hétf. Ápr. 27, 2009 5:42 pm Hozzászólás témája: |
|
|
Carlsson wrote:
| arhi_tectu1 írta: |
thank you so much everybody
i think i will buy a katzeye screen and see if it resolved the problem
Thanks |
Have you checked this? http://forum.mflenses.com/custom-focus-split-screens-for-most-dslr-available-now-t16369.html
Perhaps this focus screen might help? _________________
Contax III, Zeiss Ikon ZM, Contax AX, EOS 5D, R-D1
https://mariaeero.com/contax/ |
|
| Vissza az elejére |
|
 |
Olivier
 Csatlakozott: 2009.02.18. Szerda 17:20 Hozzászólások: 5097 Tartózkodási hely: France
Expire: 2015-08-06
|
 Elküldve: Szomb. Máj. 02, 2009 10:23 am Hozzászólás témája: |
|
 Elküldve: Szomb. Máj. 02, 2009 10:23 am Hozzászólás témája: |
|
|
Olivier wrote:
| aoleg írta: |
The problem is well-known for the 40D and other Canon 1.6x crop cameras. All of my lenses behaved exactly as you described on my 40D: more or less normal metering wide open and severe overexposure stopped down. Apparently, AF confirmation chips partially mitigated the problem (e.g. I was still getting overexposure on most lenses, but not by as much as without the chip).
|
Exactly the same with my 40D and I have an AF confirmation chip.
Wide open at 2.8 for instance : ok
5.6 : -2 stops left
8 : -4 stops left
11 : -6 stops left
16 : full left
I will have a look at what Carlsson said about metering method.
Olivier _________________ Olivier - Moderator
Dslr : Olympus Pen E-P2 - Fujifilm X-Pro2 - Canon 5D MkIII.
SLr and MF lenses : for feedback and helping people, cameras and lenses I own : full list here http://forum.mflenses.com/viewtopic,p,1442740.html#1442740 |
|
| Vissza az elejére |
|
 |
Olivier
 Csatlakozott: 2009.02.18. Szerda 17:20 Hozzászólások: 5097 Tartózkodási hely: France
Expire: 2015-08-06
|
 Elküldve: Szomb. Máj. 02, 2009 10:45 am Hozzászólás témája: |
|
 Elküldve: Szomb. Máj. 02, 2009 10:45 am Hozzászólás témája: |
|
|
Olivier wrote:
Poilu : what is a EE-s screen ?
Merci d'avance.
Olivier
 _________________ Olivier - Moderator
Dslr : Olympus Pen E-P2 - Fujifilm X-Pro2 - Canon 5D MkIII.
SLr and MF lenses : for feedback and helping people, cameras and lenses I own : full list here http://forum.mflenses.com/viewtopic,p,1442740.html#1442740 |
|
| Vissza az elejére |
|
 |
Olivier
 Csatlakozott: 2009.02.18. Szerda 17:20 Hozzászólások: 5097 Tartózkodási hely: France
Expire: 2015-08-06
|
 Elküldve: Csüt. Máj. 14, 2009 8:43 pm Hozzászólás témája: |
|
 Elküldve: Csüt. Máj. 14, 2009 8:43 pm Hozzászólás témája: |
|
|
Olivier wrote:
UP...
Please, what is a EE screen ?
Thanks
Olivier _________________ Olivier - Moderator
Dslr : Olympus Pen E-P2 - Fujifilm X-Pro2 - Canon 5D MkIII.
SLr and MF lenses : for feedback and helping people, cameras and lenses I own : full list here http://forum.mflenses.com/viewtopic,p,1442740.html#1442740 |
|
| Vissza az elejére |
|
 |
Orio
Csatlakozott: 2007.02.24. Szombat 18:17 Hozzászólások: 29545 Tartózkodási hely: West Emilia
Expire: 2012-12-04
|
 Elküldve: Csüt. Máj. 14, 2009 8:51 pm Hozzászólás témája: |
|
 Elküldve: Csüt. Máj. 14, 2009 8:51 pm Hozzászólás témája: |
|
|
Orio wrote:
Ee is the name of Canon's screen replacements.
They come in various flavours (Ee-s, Ee-whatever...) _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Vissza az elejére |
|
 |
Olivier
 Csatlakozott: 2009.02.18. Szerda 17:20 Hozzászólások: 5097 Tartózkodási hely: France
Expire: 2015-08-06
|
 Elküldve: Pént. Máj. 15, 2009 6:40 am Hozzászólás témája: |
|
 Elküldve: Pént. Máj. 15, 2009 6:40 am Hozzászólás témája: |
|
|
Olivier wrote:
Thanks Orio.
 _________________ Olivier - Moderator
Dslr : Olympus Pen E-P2 - Fujifilm X-Pro2 - Canon 5D MkIII.
SLr and MF lenses : for feedback and helping people, cameras and lenses I own : full list here http://forum.mflenses.com/viewtopic,p,1442740.html#1442740 |
|
| Vissza az elejére |
|
 |
|
|
|
Nem készíthetsz új témákat ebben a fórumban. Nem válaszolhatsz egy témára ebben a fórumban. Nem módosíthatod a hozzászólásaidat a fórumban. Nem törölheted a hozzászólásaidat a fórumban. Nem szavazhatsz ebben fórumban.
|