| Előző téma megtekintése :: Következő téma megtekintése |
| Szerző |
Üzenet |
Razster
 Csatlakozott: 2008.02.05. Kedd 22:15 Hozzászólások: 101
|
 Elküldve: Szer. Szept. 02, 2009 8:34 pm Hozzászólás témája: Tripod Question: Bolt Size? |
|
 Elküldve: Szer. Szept. 02, 2009 8:34 pm Hozzászólás témája: Tripod Question: Bolt Size? |
|
|
Razster wrote:
What is the bolt size that you screw into the camera?
I'm looking to buy bushings so that I can drill, screw in and mount a wooden pinhole camera, but I don't know what the size is.
I see the 1/4 to 3/8 bushings. http://www.bhphotovideo.com/c/product/221118-REG/
But is this a reducer I need for standard tripod mount?
Thanks for any help. |
|
| Vissza az elejére |
|
 |
Razster
 Csatlakozott: 2008.02.05. Kedd 22:15 Hozzászólások: 101
|
 Elküldve: Szer. Szept. 02, 2009 8:42 pm Hozzászólás témája: |
|
 Elküldve: Szer. Szept. 02, 2009 8:42 pm Hozzászólás témája: |
|
|
Razster wrote:
I think I might have found my answer: http://www.sjdiscounttools.com/hel5521-6.html |
|
| Vissza az elejére |
|
 |
visualopsins
 Csatlakozott: 2009.03.05. Csütörtök 19:40 Hozzászólások: 11700 Tartózkodási hely: California
Expire: 2027-07-11
|
 Elküldve: Szer. Szept. 02, 2009 9:20 pm Hozzászólás témája: |
|
 Elküldve: Szer. Szept. 02, 2009 9:20 pm Hozzászólás témája: |
|
|
visualopsins wrote:
standard 1/4-20 thread, not too long to avoid wrecking camera! _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| Vissza az elejére |
|
 |
Farside
 Csatlakozott: 2007.09.01. Szombat 22:00 Hozzászólások: 6579 Tartózkodási hely: Ireland
Expire: 2013-12-27
|
 Elküldve: Szer. Szept. 02, 2009 10:34 pm Hozzászólás témája: |
|
 Elküldve: Szer. Szept. 02, 2009 10:34 pm Hozzászólás témája: |
|
|
Farside wrote:
The modern small thread is 1/4" Whitworth, the older Continental thread is 3/8" Whitworth.
If you have a 1/4" UNC bolt it will go in, but don't force it (or I might be thinking of 6mm).
Don't ask me why the world camera industry settled on an obsolete UK Imperial bolt size, the answer is lost in the mists of time - probably the wide base of installed equipment. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| Vissza az elejére |
|
 |
Razster
 Csatlakozott: 2008.02.05. Kedd 22:15 Hozzászólások: 101
|
 Elküldve: Szer. Szept. 02, 2009 11:06 pm Hozzászólás témája: |
|
 Elküldve: Szer. Szept. 02, 2009 11:06 pm Hozzászólás témája: |
|
|
Razster wrote:
Thanks!
Off to buy some threads |
|
| Vissza az elejére |
|
 |
Razster
 Csatlakozott: 2008.02.05. Kedd 22:15 Hozzászólások: 101
|
 Elküldve: Csüt. Szept. 03, 2009 5:18 pm Hozzászólás témája: |
|
 Elküldve: Csüt. Szept. 03, 2009 5:18 pm Hozzászólás témája: |
|
|
Razster wrote:
| Farside írta: |
The modern small thread is 1/4" Whitworth, the older Continental thread is 3/8" Whitworth.
If you have a 1/4" UNC bolt it will go in, but don't force it (or I might be thinking of 6mm).
Don't ask me why the world camera industry settled on an obsolete UK Imperial bolt size, the answer is lost in the mists of time - probably the wide base of installed equipment. |
Ok before I purchase... All Tripods and cameras are 1/4-20 as of today? I don't have a way to measure as I'm always at my office.
I just want to be sure I will be ordering the correct helicoil kit/tap.
Thank you guys for your help, I do appreciate it.
-Nate |
|
| Vissza az elejére |
|
 |
Farside
 Csatlakozott: 2007.09.01. Szombat 22:00 Hozzászólások: 6579 Tartózkodási hely: Ireland
Expire: 2013-12-27
|
 Elküldve: Csüt. Szept. 03, 2009 11:38 pm Hozzászólás témája: |
|
 Elküldve: Csüt. Szept. 03, 2009 11:38 pm Hozzászólás témája: |
|
|
Farside wrote:
| Razster írta: |
Ok before I purchase... All Tripods and cameras are 1/4-20 as of today? |
Yep, that's the case, to the best of my knowledge. I've never come across any other thread, with the exception of the 3/8 option, which was /is still being used in heavier equipment. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| Vissza az elejére |
|
 |
SkedAddled
 Csatlakozott: 2008.10.19. Vasárnap 1:05 Hozzászólások: 1447 Tartózkodási hely: Michigan, USA
Expire: 2021-08-12
|
 Elküldve: Pént. Szept. 04, 2009 12:32 am Hozzászólás témája: |
|
 Elküldve: Pént. Szept. 04, 2009 12:32 am Hozzászólás témája: |
|
|
SkedAddled wrote:
| Razster írta: |
| Ok before I purchase... All Tripods and cameras are 1/4-20 as of today? |
MOST tripods and cameras use this standard. As Dave mentions, the larger is still in use, but normally with esoteric, heavy, or rather non-mainstream gear. Many high-end tripods still include the 1/4-20 screw as standard, while including the adaptor to also use as 3/8 if needed. _________________ Craig
Of course I'm all right! Why? What have you heard!?
Canon Digital EOS 5D Mk IV, EOS 50D, Powershot S3 iS
Vivitar 28 f/2.8 OM - Zuiko 50 f/1.8 OM - Tamron SP 28-80 f/3.5 AD2[Favorite!] - Hanimar 135 f/3.5 M42 - Soligor 135 f/2.8 T4 - Tamron SP 60-300 f/3.8 AD2 - Soligor 75-260 f/4.5 M42 - Soligor 400 f/6.3 T4 - Soligor 500 f/8 T2 Cat + Matched 2X TC - Addiction Growing!
This is us -- We drive these -- We're named these |
|
| Vissza az elejére |
|
 |
bob955i
 Csatlakozott: 2007.04.15. Vasárnap 10:00 Hozzászólások: 2495
|
 Elküldve: Szomb. Szept. 05, 2009 7:53 am Hozzászólás témája: |
|
 Elküldve: Szomb. Szept. 05, 2009 7:53 am Hozzászólás témája: |
|
|
bob955i wrote:
IIRC most if not all Manfrotto tripods and heads use 3/8" - it's certainly 3/8" on my 055XPROB tripod and MN229 and MN488 heads. Some of the older Exaktas and the Mamiya RB67 also used 3/8" although in the case of those and Manfrotto heads, you can use a 3/8" male-1/4" female reducer. |
|
| Vissza az elejére |
|
 |
PaulC
 Csatlakozott: 2008.12.23. Kedd 11:01 Hozzászólások: 2318
|
 Elküldve: Szomb. Szept. 05, 2009 10:19 am Hozzászólás témája: |
|
 Elküldve: Szomb. Szept. 05, 2009 10:19 am Hozzászólás témája: |
|
|
PaulC wrote:
It's the quick-release plate, really, not the tripod. I don't know if different size screws are available in standard plates, it would be an easy option for manufacturers. _________________ View or buy my photos at:
http://shutterstock.com/g/paulcowan |
|
| Vissza az elejére |
|
 |
bob955i
 Csatlakozott: 2007.04.15. Vasárnap 10:00 Hozzászólások: 2495
|
 Elküldve: Vas. Szept. 06, 2009 7:58 am Hozzászólás témája: |
|
 Elküldve: Vas. Szept. 06, 2009 7:58 am Hozzászólás témája: |
|
|
bob955i wrote:
The Manfrotto 030 hex QR plates come in both 1/4" and 3/8" versions - there's also a large square version of the 030 plate for the more well endowed camera: http://tinyurl.com/QR-plate
I don't know if their other QR plates have dual thread options though.
Speaking as a user, not a seller, of their stuff...  |
|
| Vissza az elejére |
|
 |
Farside
 Csatlakozott: 2007.09.01. Szombat 22:00 Hozzászólások: 6579 Tartózkodási hely: Ireland
Expire: 2013-12-27
|
 Elküldve: Vas. Szept. 06, 2009 11:00 pm Hozzászólás témája: |
|
 Elküldve: Vas. Szept. 06, 2009 11:00 pm Hozzászólás témája: |
|
|
Farside wrote:
Found something that states it well - http://www.enginehistory.org/british_fasteners.htm
So, 1/4" UNC will fit, no problem, but the thread angle is not the same as BSW, which is relatively unimportant in this application. The warning of doom below applies to safety-important fastenings, not camera tripods.
On the other hand; if the tripod fastening is being used a lot, premature wear of the thread might result. Your call.
It's still possible to get BSW fasteners if you look for them.
"Another area that causes confusion is the fact that some BSW or BSF nuts can be screwed on UNF or UNC bolts and vice-versa. Under NO circumstances should this practice even be considered. Most of the coarse threads share the same threads per inch which means BSW nuts can be screwed onto UNC bolts and vice-versa. The exception to this being ½ inch -- ½ inch BSW is 12 threads per inch and ½ inch UNC is 13 threads per inch. Again, it must be emphasized that this practice should not be a consideration. Whitworth and UNC/UNF thread forms differ greatly, the primarily one being the thread angle (see illustrations). BSW and BSF feature a 55 degree thread angle (47 ½ degrees for BA) and UNC/UNF threads feature a 60 degree thread angle. Consequently, if these fasteners are interchanged, considerable loss of holding force, fatigue resistance and strength will result. Unfortunately, this author has seen examples of mechanics -- unaware the these subtleties -- mixing fasteners at will -- gee, if it screws on it must be okay..!! (Scary thought). _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| Vissza az elejére |
|
 |
Seele
 Csatlakozott: 2009.04.17. Péntek 6:26 Hozzászólások: 746 Tartózkodási hely: Sydney Australia
|
 Elküldve: Hétf. Szept. 07, 2009 7:30 am Hozzászólás témája: Re: Tripod Question: Bolt Size? |
|
 Elküldve: Hétf. Szept. 07, 2009 7:30 am Hozzászólás témája: Re: Tripod Question: Bolt Size? |
|
|
Seele wrote:
Nate,
| Razster írta: |
What is the bolt size that you screw into the camera?
I'm looking to buy bushings so that I can drill, screw in and mount a wooden pinhole camera, but I don't know what the size is.
I see the 1/4 to 3/8 bushings. http://www.bhphotovideo.com/c/product/221118-REG/
But is this a reducer I need for standard tripod mount?
Thanks for any help. |
If you are building a wooden camera from scratch get "T-nuts" with the 1/4 Whitworth thread.
A T-nut is a threaded sleeve into which the screw fits, and it has an integral flange at the end, and the flange has four spikes for stopping it from rotating.
So, on the base plate you drill a hole that allows the "sleeve" to go right through, and use an auger bit the same diameter of the flange to make a recess for the flange to sit in. Make sure that when the T-nut is fitted, its end just falls short of being flush with the base surface. Use a small drill to drill holes for the spikes to locate themselves. Of course, you would need to add another piece of material on top of the T-nut to stop it from falling into the camera.
The Bender self-assembly large format camera kit includes such T-nuts but I get them from the local hardware store without trouble. |
|
| Vissza az elejére |
|
 |
|
|
|
Nem készíthetsz új témákat ebben a fórumban. Nem válaszolhatsz egy témára ebben a fórumban. Nem módosíthatod a hozzászólásaidat a fórumban. Nem törölheted a hozzászólásaidat a fórumban. Nem szavazhatsz ebben fórumban.
|