| Előző téma megtekintése :: Következő téma megtekintése |
| Szerző |
Üzenet |
indianadinos
 Csatlakozott: 2008.07.06. Vasárnap 9:09 Hozzászólások: 1310 Tartózkodási hely: Toulouse, France
Expire: 2011-12-05
|
 Elküldve: Kedd. Márc. 16, 2010 10:30 pm Hozzászólás témája: Aaaaagh, i need your help ... |
|
 Elküldve: Kedd. Márc. 16, 2010 10:30 pm Hozzászólás témája: Aaaaagh, i need your help ... |
|
|
indianadinos wrote:
Hi all,
A friend of mine borrowed my Flek 20/2.8 and managed (apparently, trying to remove a filter he screwed in) to unscrew the whole optical group from the lens, which means that now i have my lens in two parts: the barrel and the inner optical group ...
I survived the choc (with my friend retaining me from strangling him), and now i'm stuck with the lens (i had a link on a Flickr set with the service tutorial, but the owner seems to have removed the pictures) ...
Anyone knows where to start to rebuild it properly ? Do i have to disassemble the focusing barrel, or i can try to screw in the optical group ?
The technique i suggested to another owner a few time ago (simply screwing in the optical group) doesn't seem to work well (i was thinking i fixed mine, but maybe it wasn't) ...
Thanks in advance to all for your replies ...
Cheers _________________ Please visit my blogs Shooting with a Pentax K10D / FF Visions
Takumar: 24/3.5, 28/3.5, 35/2, 35/3.5, 50/1.4, 55/1.8, 85/1.8, 105/2.8, 120/2.8, 135/3.5, 150/4, 200/4
Pentax-K: M28/2.8, K28/3.5, M50/1.4, A50/1.7, M50/4 Macro, K85/1.8, K105/2.8, K135/2.5, M200/4, M70-150/4
Zeiss: Flektogon 20/2.8, 20/4, 35/2.4, 35/2.8, Tessar 50/2.8, Pancolar 50/1.8, Biotar 58/2, Sonnar 135/3.5, Sonnar 180/2.8
Meyer: Primagon 35/4.5, Domiplan 50/2.8, Oreston 50/1.8, Primoplan 58/1.9, Trioplan 100/2.8, Orestor 100/2.8, Orestor 135/2.8
Schacht/Steinheil: Travenar 90/2.8, Travenon 135/4.5, Quinar 135/2.8, Quinar 135/3.5
Russian: MIR 37B, Industar 50/3.5, Helios 44M & 44M-2, Jupiter 37A
P6: Flektogon 50/4, Biometar 80/2.8, Orestor 300/4
Nikkor: Nikkor-O 35/2, Micro 55/3.5, Nikkor-S 50/1.4, Nikkor-Q 135/2.8
Fuji: EBC 28/3.5, EBC 55/3.5 Macro, EBC 135/2.5
Misc Lenses: Kiron 105/2.8 Macro, Tamron SP90/2.5
... and a few other Vivitar, Tamron, Sigma and Soligor lenses ...
|
|
| Vissza az elejére |
|
 |
Arkku
 Csatlakozott: 2007.02.28. Szerda 10:29 Hozzászólások: 1416 Tartózkodási hely: Helsinki, Finland
|
 Elküldve: Kedd. Márc. 16, 2010 11:51 pm Hozzászólás témája: |
|
 Elküldve: Kedd. Márc. 16, 2010 11:51 pm Hozzászólás témája: |
|
|
Arkku wrote:
So, can you just screw it back in? If so, and you have incorrect focus (e.g. won't reach infinity or will go over it), unscrew again and try again; you need to put it on specific threads to get the same focus.
(This is just speculation based on general experience, not this particular lens.)
A hozzászólás legutóbb Arkku által Szer. Márc. 17, 2010 8:33 pm-kor lett szerkesztve, összesen 1 alkalommal. |
|
| Vissza az elejére |
|
 |
Kathmandu
 Csatlakozott: 2009.12.09. Szerda 18:23 Hozzászólások: 1479 Tartózkodási hely: (Kathmandu,Nepal. Currently)Pacific Northwest, USA
Expire: 2012-04-08
|
 Elküldve: Szer. Márc. 17, 2010 1:18 am Hozzászólás témája: |
|
 Elküldve: Szer. Márc. 17, 2010 1:18 am Hozzászólás témája: |
|
|
Kathmandu wrote:
Lol@
| Idézet: |
| I survived the choc (with my friend retaining me from strangling him) |
I do feel sorry for you.
I am sure you've seen this if its even similar I dont know
http://www.kolumbus.fi/uusilehto/img/lenses/zeiss/disass/
In this -looks like the focusing barrel has to come off and the front assembly unscrews from the aperture and rear cell. If yours is similar looks like the front assembly has to to screw back to the aperture and rear cell first , and then the focusing barrel screws back on last.
I have not personally opened or closed one of these before myself.
Regards |
|
| Vissza az elejére |
|
 |
mo
 Csatlakozott: 2009.08.27. Csütörtök 4:41 Hozzászólások: 8979 Tartózkodási hely: Australia
Expire: 2016-07-30
|
 Elküldve: Szer. Márc. 17, 2010 4:19 am Hozzászólás témája: |
|
 Elküldve: Szer. Márc. 17, 2010 4:19 am Hozzászólás témája: |
|
|
mo wrote:
I feel your pain ...no more loaning out your lens?? _________________ Moira, Moderator
Fuji XE-1,Pentax K-01,Panasonic G1,Panasonic G5,Pentax MX
Ricoh Singlex TLS,KR-5,KR-5Super,XR-10
Lenses
Auto Rikenon's 55/1.4, 1.8, 2.8... 50/1.7 Takumar 2/58 Preset Takumar 2.8/105 Auto Takumar 2.2/55, 3.5/35 Super Takumar 1.8/55...Macro Takumar F4/50... CZJ Biotar ALU M42 2/58 CZJ Tessar ALU M42 2.8/50
CZJ DDR Flektogon Zebra M42 2.8/35 CZJ Pancolar M42 2/50 CZJ Pancolar Exakta 2/50
Auto Mamiya/Sekor 1.8/55 ...Auto Mamiya/Sekor 2/50 Auto Mamiya/Sekor 2.8/50 Auto Mamiya/Sekor 200/3.5 Tamron SP500/8 Tamron SP350/5.6 Tamron SP90/2.5
Primoplan 1.9/58 Primagon 4.5/35 Telemegor 5.5/150 Angenieux 3.5/28 Angenieux 3,5/135 Y 2
Canon FL 58/1.2,Canon FL85/1.8,Canon FL 100/3.5,Canon SSC 2.8/100 ,Konica AR 100/2.8, Nikkor P 105/2.5
|
|
| Vissza az elejére |
|
 |
Anu
 Csatlakozott: 2009.04.14. Kedd 14:54 Hozzászólások: 879
|
 Elküldve: Szer. Márc. 17, 2010 4:29 pm Hozzászólás témája: |
|
 Elküldve: Szer. Márc. 17, 2010 4:29 pm Hozzászólás témája: |
|
|
Anu wrote:
| Arkku írta: |
So, can you just screw it back in? If so, and you have incorrect focus (e.g. won't reach infinity for will go over it), unscrew again and try again; you need to put it on specific threads to get the same focus.
(This is just speculation based on general experience, not this particular lens.) |
When I accidently unscrewed the front element(s) off my Flek 20/2.8, screwing it back caused infinity problems. The fix was to loosen (or was it tighten?) the infinity stopper screw, rotating an internal part that's normally blocked by it (of course first to the wrong direction ), fixing the screw again and then reassembling the objective. The image quality improved greatly.
My hypothesis is that in the CZJ factory they had this lazy assembly worker who, instead of bothering to adjust the infinity properly, just screwed the front piece a bit loosely on. This hypothesis would explain the rather drastic differences in peoples experiences of this lens when used wide open. I wonder, if this copy of the original poster is also one which doesn't deliver as much as expected (especially wide open)? |
|
| Vissza az elejére |
|
 |
indianadinos
 Csatlakozott: 2008.07.06. Vasárnap 9:09 Hozzászólások: 1310 Tartózkodási hely: Toulouse, France
Expire: 2011-12-05
|
 Elküldve: Szer. Márc. 17, 2010 6:08 pm Hozzászólás témája: |
|
 Elküldve: Szer. Márc. 17, 2010 6:08 pm Hozzászólás témája: |
|
|
indianadinos wrote:
Hi all,
| Arkku írta: |
| So, can you just screw it back in? |
Yes, now that i remembered/noticed that the optical group screws in counterclockwise now i can ...
Of course, i have to fix it now for infinity focus ...
| Kathmandu írta: |
| I do feel sorry for you. |
Me too ...
| Kathmandu írta: |
| I am sure you've seen this if its even similar I dont know ... |
Yes, but the lens assembly seems to be not the same ...
| Mo-Fo írta: |
| I feel your pain ...no more loaning out your lens?? |
Niet, not even my Primoplan 50 ...
| Anu írta: |
| When I accidently unscrewed the front element(s) off my Flek 20/2.8, screwing it back caused infinity problems. The fix was to loosen (or was it tighten?) the infinity stopper screw, rotating an internal part that's normally blocked by it (of course first to the wrong direction Wink ), fixing the screw again and then reassembling the objective. The image quality improved greatly. |
Do you have a photosequence of the service ?
Thanks to all for your replies ...
Cheers _________________ Please visit my blogs Shooting with a Pentax K10D / FF Visions
Takumar: 24/3.5, 28/3.5, 35/2, 35/3.5, 50/1.4, 55/1.8, 85/1.8, 105/2.8, 120/2.8, 135/3.5, 150/4, 200/4
Pentax-K: M28/2.8, K28/3.5, M50/1.4, A50/1.7, M50/4 Macro, K85/1.8, K105/2.8, K135/2.5, M200/4, M70-150/4
Zeiss: Flektogon 20/2.8, 20/4, 35/2.4, 35/2.8, Tessar 50/2.8, Pancolar 50/1.8, Biotar 58/2, Sonnar 135/3.5, Sonnar 180/2.8
Meyer: Primagon 35/4.5, Domiplan 50/2.8, Oreston 50/1.8, Primoplan 58/1.9, Trioplan 100/2.8, Orestor 100/2.8, Orestor 135/2.8
Schacht/Steinheil: Travenar 90/2.8, Travenon 135/4.5, Quinar 135/2.8, Quinar 135/3.5
Russian: MIR 37B, Industar 50/3.5, Helios 44M & 44M-2, Jupiter 37A
P6: Flektogon 50/4, Biometar 80/2.8, Orestor 300/4
Nikkor: Nikkor-O 35/2, Micro 55/3.5, Nikkor-S 50/1.4, Nikkor-Q 135/2.8
Fuji: EBC 28/3.5, EBC 55/3.5 Macro, EBC 135/2.5
Misc Lenses: Kiron 105/2.8 Macro, Tamron SP90/2.5
... and a few other Vivitar, Tamron, Sigma and Soligor lenses ...
|
|
| Vissza az elejére |
|
 |
peterqd
 Csatlakozott: 2007.02.28. Szerda 18:59 Hozzászólások: 7449 Tartózkodási hely: near High Wycombe, UK
Expire: 2014-01-04
|
 Elküldve: Szer. Márc. 17, 2010 6:39 pm Hozzászólás témája: |
|
 Elküldve: Szer. Márc. 17, 2010 6:39 pm Hozzászólás témája: |
|
|
peterqd wrote:
Dino, I've had this lens apart but I don't have any pictures. If the front lens block has simply unscrewed it shouldn't have affected infinity focus and you can just screw it back in.
Infinity focus is adjusted with the filter ring and I fear your friend has probably turned it when he was trying to unscrew the filter. The filter ring is clamped by a large screw ring like a lens ring. It has two notches and has to be tightened with a lens spanner. The annoying part is that the front lens block has to be in place in order to check the adjustment, and this makes getting at the notches very awkward. You need the type of spanner with the points closer together so that they can reach under the large front lens (I hope you understand that!).
I think maybe you should screw the lens block back in first and check infinity focus. With some luck it will be OK.
I haven't fixed mine yet. I'll try and take some pics for you later this evening. I don't have time right now. _________________ Peter - Moderator |
|
| Vissza az elejére |
|
 |
indianadinos
 Csatlakozott: 2008.07.06. Vasárnap 9:09 Hozzászólások: 1310 Tartózkodási hely: Toulouse, France
Expire: 2011-12-05
|
 Elküldve: Csüt. Márc. 18, 2010 11:18 pm Hozzászólás témája: |
|
 Elküldve: Csüt. Márc. 18, 2010 11:18 pm Hozzászólás témája: |
|
|
indianadinos wrote:
Hi Peter,
Thanks very much for your precious hints ... I will try to fix the lens this sunday (i fear i will not have the time to do it before) ...
It would be very nice if you could post some pics while fixing the lens ...
Many thanks again _________________ Please visit my blogs Shooting with a Pentax K10D / FF Visions
Takumar: 24/3.5, 28/3.5, 35/2, 35/3.5, 50/1.4, 55/1.8, 85/1.8, 105/2.8, 120/2.8, 135/3.5, 150/4, 200/4
Pentax-K: M28/2.8, K28/3.5, M50/1.4, A50/1.7, M50/4 Macro, K85/1.8, K105/2.8, K135/2.5, M200/4, M70-150/4
Zeiss: Flektogon 20/2.8, 20/4, 35/2.4, 35/2.8, Tessar 50/2.8, Pancolar 50/1.8, Biotar 58/2, Sonnar 135/3.5, Sonnar 180/2.8
Meyer: Primagon 35/4.5, Domiplan 50/2.8, Oreston 50/1.8, Primoplan 58/1.9, Trioplan 100/2.8, Orestor 100/2.8, Orestor 135/2.8
Schacht/Steinheil: Travenar 90/2.8, Travenon 135/4.5, Quinar 135/2.8, Quinar 135/3.5
Russian: MIR 37B, Industar 50/3.5, Helios 44M & 44M-2, Jupiter 37A
P6: Flektogon 50/4, Biometar 80/2.8, Orestor 300/4
Nikkor: Nikkor-O 35/2, Micro 55/3.5, Nikkor-S 50/1.4, Nikkor-Q 135/2.8
Fuji: EBC 28/3.5, EBC 55/3.5 Macro, EBC 135/2.5
Misc Lenses: Kiron 105/2.8 Macro, Tamron SP90/2.5
... and a few other Vivitar, Tamron, Sigma and Soligor lenses ...
|
|
| Vissza az elejére |
|
 |
CarbonR
 Csatlakozott: 2008.12.31. Szerda 18:32 Hozzászólások: 1985 Tartózkodási hely: Auvergne, France
|
 Elküldve: Pént. Márc. 19, 2010 11:12 am Hozzászólás témája: |
|
 Elküldve: Pént. Márc. 19, 2010 11:12 am Hozzászólás témája: |
|
|
CarbonR wrote:
Say to your friend he has to buy you a new lens at least in the same condition than yours, and you left him your 20/2.8 parts  _________________ Here lies my signature. |
|
| Vissza az elejére |
|
 |
|
|