| Előző téma megtekintése :: Következő téma megtekintése |
| Szerző |
Üzenet |
William
 Csatlakozott: 2009.11.26. Csütörtök 12:36 Hozzászólások: 489 Tartózkodási hely: London
|
 Elküldve: Szer. Okt. 13, 2010 8:48 pm Hozzászólás témája: Your printers |
|
 Elküldve: Szer. Okt. 13, 2010 8:48 pm Hozzászólás témája: Your printers |
|
|
William wrote:
I think it would be good to discuss the digital photo printers that forum members use. Which printer do you use? Are you happy with it and what are it's strengths and weaknesses?
I use a Canon Pixma ip4700 inkjet, now replaced by the near identical ip4820. I have to say I was amazed how it performed considering the price of around £80, there have been prints back from printers with lower colour fidelity and sharpness. Black and white prints are not tinted and maintain subtle toning too and it is rare that I have to edit a photo for printing from how it was for monitor viewing. The only real downside is the speed, it takes well over 2 minutes to print at A4 high quality but this is not important to me. |
|
| Vissza az elejére |
|
 |
Orio
Csatlakozott: 2007.02.24. Szombat 18:17 Hozzászólások: 29545 Tartózkodási hely: West Emilia
Expire: 2012-12-04
|
 Elküldve: Szer. Okt. 13, 2010 8:51 pm Hozzászólás témája: |
|
 Elküldve: Szer. Okt. 13, 2010 8:51 pm Hozzászólás témája: |
|
|
Orio wrote:
how did you set up your system with regards to printer colour calibration, monitor profile syncing, etc ? _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Vissza az elejére |
|
 |
William
 Csatlakozott: 2009.11.26. Csütörtök 12:36 Hozzászólások: 489 Tartózkodási hely: London
|
 Elküldve: Szer. Okt. 13, 2010 8:59 pm Hozzászólás témája: |
|
 Elküldve: Szer. Okt. 13, 2010 8:59 pm Hozzászólás témája: |
|
|
William wrote:
The printer is not calibrated with the monitor but the colours seem pretty accurate. I use ICC profiles for the paper I am using, mainly Ilford Smooth Heavyweight Matt and Smooth Fine Art (although rarely the latter as it's very expensive) If results aren't quite right I edit and reprint. |
|
| Vissza az elejére |
|
 |
natebarnz
 Csatlakozott: 2010.01.14. Csütörtök 8:45 Hozzászólások: 331 Tartózkodási hely: Los Angeles / Tucson
Expire: 2013-01-23
|
 Elküldve: Csüt. Okt. 14, 2010 4:49 pm Hozzászólás témája: |
|
 Elküldve: Csüt. Okt. 14, 2010 4:49 pm Hozzászólás témája: |
|
|
natebarnz wrote:
I'm very new to photo printers but I found a great deal on a Canon PIXMA Pro9000mkII and I am extremely happy with the results. I have done no calibration yet and am using the provided printing software on my Mac. I've currently only used the Canon Platinum paper. I was able to print over 100 4x6 photos and I ran out of photo magenta, everything else is over half to completely full.
I'm hoping to learn some things from this thread as I'm sure I can improve my results. _________________ 500D / SPII / FTn / Contax D / 137MA / Contaflex
Contax 28/2 - 35/1.4 - 35/2.8 - 45/2.8 - 50/1.4 - 100/3.5 - 135/2.8
CZJ 20/4 - 35/2.8 - 50/2.8 - 58/2 - 135/3.5
Rokkor PG 58/1.2 - PF 58/1.4 - X 85/1.7
Nikkor S 55/1.2 - H 85/1.8 - P.C. 55/3.5
Helios 44-2 58/2 Meyer Oreston 50/1.8
Elmarit-R 90/2.8 Sears 55/1.4
--> Visit My Picasa Galleries <-- |
|
| Vissza az elejére |
|
 |
rukmeister
 Csatlakozott: 2010.08.14. Szombat 4:22 Hozzászólások: 104 Tartózkodási hely: Hobart, Australia
Expire: 2011-11-18
|
 Elküldve: Szomb. Okt. 16, 2010 8:14 pm Hozzászólás témája: |
|
 Elküldve: Szomb. Okt. 16, 2010 8:14 pm Hozzászólás témája: |
|
|
rukmeister wrote:
I run an Epson R1900 printer with a third party CIS (continuous ink supply). It's mainly used for proofing so longevity of inks isn't really a concern for me.
I have a Colormunki calibrator. Had a pro profile done for the CIS inks, but I personally couldn't see any difference between the pro and the colormunki generated profile. Also couldn't tell the difference between Epson inks and third party. Looks EXACTLY the same to my eye. I've been using the inkjetfly cis, but i would not recommend it. Its poor construction, few bits unsticking/coming off now with < 1yr use. Will be sourcing a new cis soon and trying another 3rd party ink (any recommendations anyone?).
Use a PVA panel Dell monitor (an IPS would be nice, especially an eizo, but I'd rather buy lenses with that money ) and a Dell 490 workstation which number crunches photoshop nicely. Calibrated monitor with the munki too.
Workstation is setup in controlled lighting in a grey coloured area. Lights are Solux brand MR16 colour accurate lights and I highly recommend them for your work area and for lighting your display pieces.
Usually print on Centurion Photo silk, a semigloss with a nice texture. It's cheap and gives me excellent results for proofing. Has OBAs in it I think though. Final printing usually depends on the picture, I do like hahnmuhle papers and there are a few canson i use every now and then - each paper has its own profile of course. I usually send my good stuff to imagescience.com.au for printing. I'm considering trying out fotoflot.com seems like an interesting idea.
Anyway, my workflow is fairly simple : check calibration of monitor, load RAW files in Adobe bridge, Delete rejects & Star good shots, Load in ACR (set with NO NR & NO Sharpening) and make adjustments to white balance (whibal card shot usually www.whibal.com), exposure, etc. Load in photoshop, use topaz denoise plugin, use topaz detail plugin, maybe a high pass sharpen and/or smart sharpen at this point, levels and contrast adjustment layer. Then print with PS doing the colour management & specific media profile.
Works well for me. Good consistent, predictable results. Also took a ridiculous amount of time and work to figure out this workflow where I get to spend more time using the camera to take photos then screwing around with the computer and printer. I'm there now, but wow it was a pain setting up first time around.
On a side note, this is one of the criteria for me rejecting a shot. If I have to spend more time on the computer and printer than it took to go out and take the shot, it is an automatic reject. I'd rather go back out and take the photo again then screw around with Photoshop all day. |
|
| Vissza az elejére |
|
 |
symphonic
 Csatlakozott: 2010.05.23. Vasárnap 16:18 Hozzászólások: 550 Tartózkodási hely: SE Europe, Croatia
|
 Elküldve: Szomb. Okt. 16, 2010 8:28 pm Hozzászólás témája: |
|
 Elküldve: Szomb. Okt. 16, 2010 8:28 pm Hozzászólás témája: |
|
|
symphonic wrote:
I recently got an Epson px700w (artisan 700 in the US). It's my first photo printer, so I can't compare it to anything else, but I'm satisfied with it very much. Cheap and it's a all-in-one device (it has a scanner), photo prints come out very nice (A4 max), has a wireless connectivity and lots of cheap CISS solutions to be found online. For someone with a limited budget, I'd say it's a good choice. _________________ Toni,
EOS 450D
CZJ Sonnar 135/3.5 MC | Pancolar 50/1.8 MC
Contax Planar 50/1.4 AEJ | Contax Sonnar 135/2.8 AEJ
Yashica ML 28/2.8 | Zuiko 28/3.5
Vivitar Series1 105/2.5 OM
AF: Tokina 12-24 |
|
| Vissza az elejére |
|
 |
exaklaus
 Csatlakozott: 2009.08.11. Kedd 8:41 Hozzászólások: 1633 Tartózkodási hely: Niederrhein, Germany
Expire: 2011-12-02
|
 Elküldve: Szer. Okt. 20, 2010 6:38 am Hozzászólás témája: |
|
 Elküldve: Szer. Okt. 20, 2010 6:38 am Hozzászólás témája: |
|
|
exaklaus wrote:
Use an Epson Pro 3800 mostly with Hahnemühle paper using the ICC profiles for the paper. Perfect results, but many of my large prints were made by www.digitaloriginal.de, nowadays.
Had another A3+ Epson before this one (don't recall the name and number) which was an outstanding printer, too. The results were outstanding, but it was not so easy to handle like the 3800, which works like a charme (most of the time). But with it, I'm now limited to A2+, no long panos like with the other one (3m+).
Monitor calibration with Eye-one from Gretacmacbeth. But I guess I should replace it one day, as it is some years old, now!
Klaus _________________ my Ebay auctions
Canon 5D II,
Fuji GW690III, Fuji G617, Fujifilm X-E1
Bessaflex TM
Tachihara 4"x5"
Summilux-R 1:1,4/50
Canon FD 85mm 1:1,2
Color-Heliar 75mm F2.5 SL
www.autoselbstfotografie.de
www.classic-cameras-and-lenses.de |
|
| Vissza az elejére |
|
 |
WolverineX
 Csatlakozott: 2009.04.19. Vasárnap 18:02 Hozzászólások: 1693 Tartózkodási hely: Zagreb , Croatia , Europe
|
 Elküldve: Szer. Okt. 20, 2010 12:05 pm Hozzászólás témája: |
|
 Elküldve: Szer. Okt. 20, 2010 12:05 pm Hozzászólás témája: |
|
|
WolverineX wrote:
I use Epson printers.
I have Epson stylus photo 1400 A3+ and Epson stylus photo R360 A4 and both are reliable with great quality prints ( i use original inks ). Also Epson drivers are very reliable. two weekends ago i held photo contest and my Epson worked like clockwork printing out 60 a4 prints in 2 hours (don't do math,as printing wasn't continous ) . _________________ my tools:Oly E-M5 + 45mm/1.8 + Oly E-520 + 12-60 + 14-42 + 70-300 + Sigma 105mm + FL-50R + EC20 + SRF-11 ring flash
http://forum.mflenses.com/wolverinex-testing-my-lenses-series-link-list-t39524.html |
|
| Vissza az elejére |
|
 |
trev
 Csatlakozott: 2010.06.30. Szerda 12:33 Hozzászólások: 580 Tartózkodási hely: North Wales - UK
|
 Elküldve: Kedd. Okt. 26, 2010 6:01 pm Hozzászólás témája: |
|
 Elküldve: Kedd. Okt. 26, 2010 6:01 pm Hozzászólás témája: |
|
|
trev wrote:
I use an older canon pixma ip4300 and see no need to change to for a newer model. I get good faithful colours even using "remanufactured inks" and splendid b/w prints too and I do not find it too slow either. I've not got it calibrated to my screen although colours are slightly darker on the screen....... _________________ Fuji X10, X-A1 and Samsung nx 20 |
|
| Vissza az elejére |
|
 |
William
 Csatlakozott: 2009.11.26. Csütörtök 12:36 Hozzászólások: 489 Tartózkodási hely: London
|
 Elküldve: Kedd. Okt. 26, 2010 10:02 pm Hozzászólás témája: |
|
 Elküldve: Kedd. Okt. 26, 2010 10:02 pm Hozzászólás témája: |
|
|
William wrote:
Interesting to see people's methods, Rukmeister in particular has a very thorough workflow.
Trev, as I understand the Canon printers tend to change slowly. I bought my ip4700 knowing that the ip4850 was to replace it in a few months and from what I read the printing is pretty much identical, it's just slightly faster and a little cosmetically different. |
|
| Vissza az elejére |
|
 |
visualopsins
 Csatlakozott: 2009.03.05. Csütörtök 19:40 Hozzászólások: 11698 Tartózkodási hely: California
Expire: 2027-07-11
|
 Elküldve: Pént. Nov. 19, 2010 7:07 pm Hozzászólás témája: |
|
 Elküldve: Pént. Nov. 19, 2010 7:07 pm Hozzászólás témája: |
|
|
visualopsins wrote:
EPSON Stylus Photo 1400 Series here...ink and papers are EXPENSIVE!
Tip: test print at 4x6 size to avoid wasting $$$ ink on full size print! _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| Vissza az elejére |
|
 |
William
 Csatlakozott: 2009.11.26. Csütörtök 12:36 Hozzászólások: 489 Tartózkodási hely: London
|
 Elküldve: Pént. Nov. 19, 2010 8:19 pm Hozzászólás témája: |
|
 Elküldve: Pént. Nov. 19, 2010 8:19 pm Hozzászólás témája: |
|
|
William wrote:
| visualopsins írta: |
EPSON Stylus Photo 1400 Series here...ink and papers are EXPENSIVE!
|
I share your pain, I got about 40 20x13.3cm prints out of my printer's first ink, hopefully those cartridges have less ink in than usual. My favourite paper, Ilford Smooth Fine Art is hard to find for less than 90p an A4 sheet so is rarely used. I mainly use Ilford Smooth Heavyweight Matt which is about 20p and is double sided. |
|
| Vissza az elejére |
|
 |
GrahamNR17
 Csatlakozott: 2009.01.17. Szombat 23:58 Hozzászólások: 1855 Tartózkodási hely: Norfolk, UK
Expire: 2012-09-06
|
 Elküldve: Csüt. Szept. 08, 2011 7:15 pm Hozzászólás témája: |
|
 Elküldve: Csüt. Szept. 08, 2011 7:15 pm Hozzászólás témája: |
|
|
GrahamNR17 wrote:
I gave up with printers for photos a long time ago. I have an old Kodak that produces superb little postcard prints for my album (I think it uses some kind of thermal colour transfer) but when I need a larger print, I upload it to Pixmania or Kodak and they print it much better than I ever could and it usually arrives within a couple of days. Over the five years I've been doing that, it has cost a lot less than the printer, ink, paper etc I would have used. |
|
| Vissza az elejére |
|
 |
peterqd
 Csatlakozott: 2007.02.28. Szerda 18:59 Hozzászólások: 7449 Tartózkodási hely: near High Wycombe, UK
Expire: 2014-01-04
|
 Elküldve: Csüt. Szept. 08, 2011 9:50 pm Hozzászólás témája: |
|
 Elküldve: Csüt. Szept. 08, 2011 9:50 pm Hozzászólás témája: |
|
|
peterqd wrote:
Seems I'm going to be the odd one out. I need an A3 printer for my music and I don't have the space (or funds) to run two. So the printer I use for occasional photoprinting is a Hewlett Packard 9300 Deskjet. It must be getting on for 10 years old now. HP inks are expensive too!
It makes quite acceptable photo prints, although I'm sure a dedicated photoprinter would be much better. There is no way I can find in the software to calibrate the colour with the monitor and sometimes I have to boost the saturation a little on the print file. _________________ Peter - Moderator |
|
| Vissza az elejére |
|
 |
trev
 Csatlakozott: 2010.06.30. Szerda 12:33 Hozzászólások: 580 Tartózkodási hely: North Wales - UK
|
 Elküldve: Pént. Szept. 09, 2011 9:15 am Hozzászólás témája: |
|
 Elküldve: Pént. Szept. 09, 2011 9:15 am Hozzászólás témája: |
|
|
trev wrote:
Sadly, my canon pixma ip4300 gave up the ghost awhile back so went out and bought their pixma ip4850 which seems to print exactly the same as my older model only slower!!!
Aint canon's ink expensive though?? _________________ Fuji X10, X-A1 and Samsung nx 20 |
|
| Vissza az elejére |
|
 |
William
 Csatlakozott: 2009.11.26. Csütörtök 12:36 Hozzászólások: 489 Tartózkodási hely: London
|
 Elküldve: Kedd. Szept. 13, 2011 3:43 pm Hozzászólás témája: |
|
 Elküldve: Kedd. Szept. 13, 2011 3:43 pm Hozzászólás témája: |
|
|
William wrote:
Trev: I believe that the cheapest place for cartridges is 7dayshop, the C/M/Y ones need replacing the most unless you do a lot of monochrome printing: http://www.7dayshop.com/catalog/product_info.php?cPath=777_2&products_id=109911
That's the same price as the CL521 pack which fits my ip4700. I think it's comparable to Epson prices. |
|
| Vissza az elejére |
|
 |
pst
 Csatlakozott: 2010.08.25. Szerda 14:04 Hozzászólások: 108 Tartózkodási hely: Austria
Expire: 2013-08-17
|
 Elküldve: Pént. Szept. 16, 2011 9:54 am Hozzászólás témája: |
|
 Elküldve: Pént. Szept. 16, 2011 9:54 am Hozzászólás témája: |
|
|
pst wrote:
I'm using the Canon Pro 9000 MkII with Canon paper. Oddly the supplied profiles never met the colors on screen. I know quite a bit about color management, but I never found out where the mistake lies. So I just used the printers color offset function so prints match my (calibrated) screen.
Prints look great, and the cartriges last long. Canon ink is not really expensive IMHO and even if a cartrige says "empty" it is possible to continue printing for quite some time. E.g. you can easily print a full A3 (very dark) b/w print on an "empty" black cartrige. _________________ Regards, Patrick. |
|
| Vissza az elejére |
|
 |
Olivier
 Csatlakozott: 2009.02.18. Szerda 17:20 Hozzászólások: 5097 Tartózkodási hely: France
Expire: 2015-08-06
|
 Elküldve: Szomb. Szept. 17, 2011 8:58 pm Hozzászólás témája: |
|
 Elküldve: Szomb. Szept. 17, 2011 8:58 pm Hozzászólás témája: |
|
|
Olivier wrote:
I 'm using a canon Pixma Pro 9000 Mark II too.
I'm very happy with the ink cartridges, the speed and the final results.
I use Canon and Epson papers and the standard profiles given for the Canon papers.
Prints are very good, both colour and b/w. No bronzing at all. _________________ Olivier - Moderator
Dslr : Olympus Pen E-P2 - Fujifilm X-Pro2 - Canon 5D MkIII.
SLr and MF lenses : for feedback and helping people, cameras and lenses I own : full list here http://forum.mflenses.com/viewtopic,p,1442740.html#1442740 |
|
| Vissza az elejére |
|
 |
|
|