MFlenses - Új élet a digitális korban
MFLenses 2026

Manuális fókuszú objektívek fóruma

Fedezd fel a régi objektívek világát javítási jegyzetekkel, valódi tesztképekkel és képekkel teli archív témákkal.

Fedezd fel a régi objektívek világát javítási jegyzetekkel, valódi tesztképekkel és képekkel teli archív témákkal.
Reflektorfény

Kiemelt partneri hely a fórum nyitólapján.

What do you clean your Zeiss with?
Előző téma megtekintése :: Következő téma megtekintése  


Reply

I am specially interested in Sonnar M42. I usually use light Ammonia cleaner solutions. But it's pretty obvious it reacts with Sonnar orange / purple MC. Any suggestions?


Reply

Not that I have any Zeiss lenses but I never use anything other than a soft lens cloth on my lenses, and only then if there is a smear or something. Mostly I just use a blower brush.

K.


Reply

Pure acetone.


Reply

I still use my supply of Opticlean polymer. It's no longer available, but I understand that a similar or even identical polymer cleaner, called Eclipse, is available. It's not cheap, but neither are Zeiss lenses.

A soap-impregnated Brillo scouring pad is also good. Makes an excellent soft-focus lens for ladies of a certain age.


Reply

In my leica M lenses, I used: water and three drops of crystal cleaner.


Reply

I'm using ROR (Residual Oil Removal), a 0.5% ammonia solution. It does not react with CZ coatings and cleans stuff pretty well. Make sure not to use the same cloth to wipe twice (this leaves traces).


Reply

ludoo írta:
Pure acetone.


This surely has to be a joke? Shocked
...Pure acetone would surely remove the lens coatings would'nt it? Acetone is a very strong solvent, often used in spraypaints, and even if it does'nt remove the coatings it could certainly remove the lenses paintwork!
The only time I would wet clean a lenses front or rear elements would be when I have managed to get finger grease on one or both of them...And only then with a drop or two of Ethanol (Alchohol) based cleaner like Print FIT PC cleaner, which does an excellent job, and with a bit of soft, clean, non lint, absorbant paper.
Such cleaner evoporates away quickly, leaving no streaks. Wink


A hozzászólás legutóbb DSG által Szer. Dec. 01, 2010 1:01 pm-kor lett szerkesztve, összesen 1 alkalommal.


Reply

alex írta:
I still use my supply of Opticlean polymer. It's no longer available, but I understand that a similar or even identical polymer cleaner, called Eclipse, is available. It's not cheap, but neither are Zeiss lenses.

A soap-impregnated Brillo scouring pad is also good. Makes an excellent soft-focus lens for ladies of a certain age.


LOL!


Reply

Very rarely I clean my lens elements.

If a fingerprint gets in a element I use Deionized water(0% residue) & microfiber cloth. For body oil+dirt I use naphtha.

99.8% just using my Giotto blower...


Reply

If I can disassemble the individual lenses, I use water with a drop of liquid dishwashing in the ultrasonic cleaner for 3'. Then I dry them with a microfiber towel.

Regards.
Jes.


Reply



With Zeiss from the Dollar store! 50 cloths for $2.00

Twisted Evil


Reply

Splendid contributions. Sadly many only available for USA market. Anyway dishwashing soaps seem good idea, i must try them.

Ammonia makes orange MC turn violet (in minor way and non-permanent but still).


Reply

I use the same tools that I use to clean the lenses of other brands.
My tools are:

1- Eclipse 1
2- Isopropyl alcohol
3- Zeiss cream
4- Vedo Chiaro eyeglasses cleaning towels

The fact is, coatings are different, not just between brands but also between lenses of the same brand. With long experimentation I have found that with one of the above tools or with a combination of some of them, I can clean every lens glass. But so far I did not write down which tools on what lens. I have recently started to write down, so that next time I need to clean a lens, I already know what works best with that lens.


Reply

DSG írta:
This surely has to be a joke? Shocked
...Pure acetone would surely remove the lens coatings would'nt it? Acetone is a very strong solvent, often used in spraypaints, and even if it does'nt remove the coatings it could certainly remove the lenses paintwork!


Nope, what damages lens coatings are acids (ever tried diluted vinegar on older lenses?), acetone is perfectly safe. In fact it's what gets recommended by manufacturers of specialized (coated) optics for laser equipment, I know because I asked when I bought a semitrasparent mirror to fix some of my rangefinders.

Acetone evaporates really quickly and totally destroys all traces of oils, something which naphta or water cannot do. You only have to be careful about breathing its fumes, and with painted or plastic surfaces.

I use q-tips dipped in acetone and lightly and quickly wipe them on the lens, checking with a strong light at an angle so that smudges on the coating are visible.

Of course, nail varnish remover is not suitable as it contains oils to soften the skin, only use pure acetone found in paint or diy stores.


Reply

Huh, that seems very risky. Did you tried acetone with Pentacons and Meyers perhaps?


Reply

Pancolart írta:
Huh, that seems very risky. Did you tried acetone with Pentacons and Meyers perhaps?


Risky? Lens coatings are susceptible to acids, not solvents like acetone. I use it on all my lenses.


Reply

An Edmunds Optics paper on cleaning

http://www.edmundoptics.com/downloads/wp_cleaning_optics.pdf

If you google around, you'll find lots of mentions of pure acetone as the cleaning fluid of choice for telescopes and precision optics.


Reply

Funny it even seems I've been using stronger stuff all along:

"Being a secondary alcohol, isopropyl alcohol can be oxidized to acetone, which is the corresponding ketone"
http://en.wikipedia.org/wiki/Isopropyl_alcohol


Reply

Pancolart írta:
Anyway dishwashing soaps seem good idea, i must try them.

I was cautioned against dishwashing soaps for lens cleaning. How much truth is in it I'm not sure, but I was told that they left a coating, possibly silicon-related, designed to make crockery look shiny. I wouldn't want to use anything that left a coating behind.


Reply

Quite an interesting read: http://www.photonlexicon.com/forums/showthread.php/8301-Cleaning-coated-optics

Has some information on how certain chemicals effect coatings, cemented elements etc. I guess most of this is common knowledge... I read it all anyway Laughing


Reply

I use a Zeiss lens tissue and Zeiss lens cleaner...

Doug

Pancolart írta:
I am specially interested in Sonnar M42. I usually use light Ammonia cleaner solutions. But it's pretty obvious it reacts with Sonnar orange / purple MC. Any suggestions?


Reply

nemesis101 írta:
I use a Zeiss lens tissue and Zeiss lens cleaner...

Doug

Pancolart írta:
I am specially interested in Sonnar M42. I usually use light Ammonia cleaner solutions. But it's pretty obvious it reacts with Sonnar orange / purple MC. Any suggestions?


Laughing Laughing


Reply

estudleon írta:
In my leica M lenses, I used: water and three drops of crystal cleaner.


water = the best cleaner..


Reply

Zeiss Liquid


http://www.google.com/products/catalog?q=zeiss+cleaner&oe=utf-8&rls=com.ubuntu:en-US:unofficial&client=firefox-a&um=1&ie=UTF-8&cid=1855050950091039429&ei=vvX2TIzQDIu6sAP3vrjpCw&sa=X&oi=product_catalog_result&ct=result&resnum=3&ved=0CDEQ8wIwAg#


Zeiss Tissues

http://www.opticsplanet.net/zeiss-lens-cleaner-tissues.html

Complete Zeiss Kit

http://www.midwayusa.com/viewProduct/?productNumber=197278

Pancolart írta:
I am specially interested in Sonnar M42. I usually use light Ammonia cleaner solutions. But it's pretty obvious it reacts with Sonnar orange / purple MC. Any suggestions?


Reply

Pancolart írta:
I am specially interested in Sonnar M42. I usually use light Ammonia cleaner solutions. But it's pretty obvious it reacts with Sonnar orange / purple MC. Any suggestions?


Eclipse and pecpads. E2 is fine too, but requires slower movements. Both are also used for sensor cleaning. Even though it is a US product, I do recommend it highly.