| Előző téma megtekintése :: Következő téma megtekintése |
| Szerző |
Üzenet |
ilguercio
 Csatlakozott: 2012.03.08. Csütörtök 0:49 Hozzászólások: 414 Tartózkodási hely: Southern Italy-Calabria!
|
 Elküldve: Hétf. Okt. 01, 2012 10:17 pm Hozzászólás témája: Grease for helicoid |
|
 Elküldve: Hétf. Okt. 01, 2012 10:17 pm Hozzászólás témája: Grease for helicoid |
|
|
ilguercio wrote:
Hello, i have an 85 mm lens from Samyang and its focusing action is quite stiff at times. It depends on the direction the lens is facing, sometimes it can also be silky smooth.
So, i want to grease the helicoid again and i read that a teflon grease is a must here.
Now, i do have a tube of ptfe grease which i use for many of the working tools i have in my home and i guess i can use that for the helicoid. Am i right?
A hozzászólás legutóbb ilguercio által Hétf. Okt. 01, 2012 10:31 pm-kor lett szerkesztve, összesen 1 alkalommal. |
|
| Vissza az elejére |
|
 |
Orio
Csatlakozott: 2007.02.24. Szombat 18:17 Hozzászólások: 29545 Tartózkodási hely: West Emilia
Expire: 2012-12-04
|
 Elküldve: Hétf. Okt. 01, 2012 10:25 pm Hozzászólás témája: |
|
 Elküldve: Hétf. Okt. 01, 2012 10:25 pm Hozzászólás témája: |
|
|
Orio wrote:
It is important that it does not get too fluid with heat. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Vissza az elejére |
|
 |
ilguercio
 Csatlakozott: 2012.03.08. Csütörtök 0:49 Hozzászólások: 414 Tartózkodási hely: Southern Italy-Calabria!
|
 Elküldve: Hétf. Okt. 01, 2012 10:32 pm Hozzászólás témája: |
|
 Elküldve: Hétf. Okt. 01, 2012 10:32 pm Hozzászólás témája: |
|
|
ilguercio wrote:
| Orio írta: |
| It is important that it does not get too fluid with heat. |
Well, i have been using it inside a rotating shaft so i guess it is pretty resistant to heat.
Since i have got the grease already i don't want to buy some on purpose.
Should i need to clean the old grease proprerly? |
|
| Vissza az elejére |
|
 |
Orio
Csatlakozott: 2007.02.24. Szombat 18:17 Hozzászólások: 29545 Tartózkodási hely: West Emilia
Expire: 2012-12-04
|
 Elküldve: Hétf. Okt. 01, 2012 10:46 pm Hozzászólás témája: |
|
 Elküldve: Hétf. Okt. 01, 2012 10:46 pm Hozzászólás témája: |
|
|
Orio wrote:
| ilguercio írta: |
Should i need to clean the old grease proprerly? |
Yes (at least I heard that from a repair man) _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Vissza az elejére |
|
 |
ilguercio
 Csatlakozott: 2012.03.08. Csütörtök 0:49 Hozzászólások: 414 Tartózkodási hely: Southern Italy-Calabria!
|
 Elküldve: Hétf. Okt. 01, 2012 11:02 pm Hozzászólás témája: |
|
 Elküldve: Hétf. Okt. 01, 2012 11:02 pm Hozzászólás témája: |
|
|
ilguercio wrote:
Nice, it shouldn't be too difficult then. At least i have disassembly pictures of the procedure somewhere online.
http://www.flickr.com/photos/gigel/sets/72157626746203425/detail/ |
|
| Vissza az elejére |
|
 |
ForenSeil
 Csatlakozott: 2011.04.15. Péntek 11:07 Hozzászólások: 2731 Tartózkodási hely: Kappeln, Schleswig-Holstein, Germany.
|
 Elküldve: Kedd. Okt. 02, 2012 7:31 pm Hozzászólás témája: |
|
 Elküldve: Kedd. Okt. 02, 2012 7:31 pm Hozzászólás témája: |
|
|
ForenSeil wrote:
| Orio írta: |
| It is important that it does not get too fluid with heat. |
+1 + not too stiff when it's cold!
| ilguercio írta: |
Well, i have been using it inside a rotating shaft so i guess it is pretty resistant to heat. |
When the sun is shining on a black lens in a car etc. it can get pretty warm. And when it get's too fluid it might leave the helicoid (which makes it stiff afterwards) or if you have bad luck go onto glas, blades etc. or make plastic parts porous etc.
[/quote]Should i need to clean the old grease proprerly?[/quote]
Generally yes. Take some isopropanol, bezine, petrolether etc. and a toothbruch/towel etc. (depends oon how dirty the helicoid is) and make it as clean as possible.
I'm using a ball bearing oil which works very well bye the way. RC car supply should also have the right oil. _________________ I'm not a collector, I'm a tester
My camera: Sony A7+Zeiss Sonnar 55/1.8
Current favourite lenses (I have many more):
A few macro-Tominons, Samyang 12/2.8, Noritsu 50.7/9.5, Rodagon 105/5.6 on bellows, Samyang 135/2, Celestron C8 2000mm F10
Most wanted: Samyang 24/1.4, Laowa 100/2.8 2x, Nikon 200/2 ED |
|
| Vissza az elejére |
|
 |
Attila
 Csatlakozott: 2007.02.24. Szombat 20:36 Hozzászólások: 58002
Expire: 2025-11-18
|
 Elküldve: Kedd. Okt. 02, 2012 7:52 pm Hozzászólás témája: |
|
 Elküldve: Kedd. Okt. 02, 2012 7:52 pm Hozzászólás témája: |
|
|
Attila wrote:
To select perfect grease is not easy, best if you can find a shop with large scale of choices and prepare your self , not cheap.
Repair man who fix stuff to me selected a grease , which cost is 300 EUR /kg , if you are lucky shop sell not only in kg pack  |
|
| Vissza az elejére |
|
 |
Lloydy
 Csatlakozott: 2009.09.02. Szerda 17:36 Hozzászólások: 7880 Tartózkodási hely: Ironbridge. UK.
Expire: 2022-01-01
|
 Elküldve: Kedd. Okt. 02, 2012 9:56 pm Hozzászólás témája: |
|
 Elküldve: Kedd. Okt. 02, 2012 9:56 pm Hozzászólás témája: |
|
|
Lloydy wrote:
I've had some good results from a silicone lube, but I have no idea of what the specification is. All I know is that it is intended to lube the mechanical parts of electrical contacts and that it is thicker than something like an oil used for sewing machines - a light oil, and thinner than a light grease such as used for bicycle cranks and hubs. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Vissza az elejére |
|
 |
ForenSeil
 Csatlakozott: 2011.04.15. Péntek 11:07 Hozzászólások: 2731 Tartózkodási hely: Kappeln, Schleswig-Holstein, Germany.
|
 Elküldve: Csüt. Okt. 04, 2012 5:44 pm Hozzászólás témája: |
|
 Elküldve: Csüt. Okt. 04, 2012 5:44 pm Hozzászólás témája: |
|
|
ForenSeil wrote:
I've already posted it in another thread but for the search-function it might be senseful to repost it here again:
http://forum.mflenses.com/anyone-skilled-in-rheology-t53245.html
Quote:
I'm using this ball bearing lubricant ("Hanseline Kugellager Abschmierfett") which works imho almost perfectly (useful viscosity, not volatile, long durability, not very temperature sensitive, very cheap (less than 2€ per 50g here)). According to the description from the producer it's made for temperatures between -30°C to +60°C, which would also fit for helicoids. I have it from a local store but you can also buy it from Ebay and several online stores at the moment.
It's based on a lithium stearate and it has "consistency class 2", so it should theoretically stiffer than most vaselines
I'm sure there are better ones, but it's cheap, reliable, safe and works much better than vaseline/silicone oil/oil for bycicle chains and other standart over-the-counter lubricants
Bye the way, I think that different lenses need different visosities for their lubricant. For example an old Elmar 50/3.5 has an very chunky helicoid while the Hexanon has a pretty filigree weird double-helicoid - I guess the Elmar would prefer a medium or even pretty stiff lubricant while the Hexanon would prefer a very smooth lubricant etc.. I already tried to relubricate the Hexanon with vaseline and it stayed pretty stiff, while viscosity-wise vaseline worked ok for most other lenses I relubricated before. _________________ I'm not a collector, I'm a tester
My camera: Sony A7+Zeiss Sonnar 55/1.8
Current favourite lenses (I have many more):
A few macro-Tominons, Samyang 12/2.8, Noritsu 50.7/9.5, Rodagon 105/5.6 on bellows, Samyang 135/2, Celestron C8 2000mm F10
Most wanted: Samyang 24/1.4, Laowa 100/2.8 2x, Nikon 200/2 ED |
|
| Vissza az elejére |
|
 |
ilguercio
 Csatlakozott: 2012.03.08. Csütörtök 0:49 Hozzászólások: 414 Tartózkodási hely: Southern Italy-Calabria!
|
 Elküldve: Szer. Okt. 24, 2012 11:28 pm Hozzászólás témája: |
|
 Elküldve: Szer. Okt. 24, 2012 11:28 pm Hozzászólás témája: |
|
|
ilguercio wrote:
And i eventually did it.
The fact is that this lens doesn't focus around a helicoid but there is the focus ring and the barrel and no helix in behind.
So these two pieces simply revolve one on another in the simplest way. Now the focus is much smoother. I also put a tiny bit of grease between the internal barrel and the back glass group as well, just to make things flow better. I obviously did a bit of focusing before reassembling the lens just to clean the excess grease.
So, the procedure is not difficult and it took me an hour as i didn't mark the alignments and thus forcing me to make a bit of trial and error. If you need further explanations just ask. The grease seems to be good, it has an operating temperature of -25°C/+120°C so it should cope with the most furious focusing actions. |
|
| Vissza az elejére |
|
 |
|
|
|
Nem készíthetsz új témákat ebben a fórumban. Nem válaszolhatsz egy témára ebben a fórumban. Nem módosíthatod a hozzászólásaidat a fórumban. Nem törölheted a hozzászólásaidat a fórumban. Nem szavazhatsz ebben fórumban.
|