| Előző téma megtekintése :: Következő téma megtekintése |
| Szerző |
Üzenet |
guardian
 Csatlakozott: 2009.03.18. Szerda 20:54 Hozzászólások: 1750
|
 Elküldve: Vas. Márc. 24, 2013 2:15 pm Hozzászólás témája: Front/rear element flipping |
|
 Elküldve: Vas. Márc. 24, 2013 2:15 pm Hozzászólás témája: Front/rear element flipping |
|
|
guardian wrote:
This is limited to lenses having front and/or rear elements which are "flippable". "Flippable" in this instance means symmetrical. A lens convex on one side and concave on the other obviously is not flippable. A lens having dissimilar curvatures front and rear is not "flippable".
That said:
What are the merits of renewing the exposed surface of a front or rear element by flipping? Depending on the lens's age and the amount of wear and tear to which it has been subjected over many years, might this not be something to consider?
For scratched lenses, would it not be better if light incident upon the lens encounters a first surface free of scratches, even if that means the exit surface will have the scratches, instead? To the extent scratches or imperfection trap dirt, would it not be better to face the scratches toward the lens's interior, where the environment is surely cleaner?
Lens flipping, when possible, seems to me something to consider. What do you think? |
|
| Vissza az elejére |
|
 |
RSalles
 Csatlakozott: 2012.08.12. Vasárnap 3:05 Hozzászólások: 1372 Tartózkodási hely: Brazil - RS / South
|
 Elküldve: Vas. Márc. 24, 2013 4:53 pm Hozzászólás témája: |
|
 Elküldve: Vas. Márc. 24, 2013 4:53 pm Hozzászólás témája: |
|
|
RSalles wrote:
I think that is better to know which can be flipped and to avoid a lens like this from a not proven reputation's seller,
[]s,
Renato |
|
| Vissza az elejére |
|
 |
Orio
Csatlakozott: 2007.02.24. Szombat 18:17 Hozzászólások: 29545 Tartózkodási hely: West Emilia
Expire: 2012-12-04
|
 Elküldve: Vas. Márc. 24, 2013 5:04 pm Hozzászólás témája: |
|
 Elküldve: Vas. Márc. 24, 2013 5:04 pm Hozzászólás témája: |
|
|
Orio wrote:
What may look like flippable, may actually be not. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Vissza az elejére |
|
 |
martinsmith99
 Csatlakozott: 2008.08.31. Vasárnap 17:50 Hozzászólások: 7029 Tartózkodási hely: S Glos, UK
Expire: 2013-11-18
|
 Elküldve: Vas. Márc. 24, 2013 6:42 pm Hozzászólás témája: |
|
 Elküldve: Vas. Márc. 24, 2013 6:42 pm Hozzászólás témája: |
|
|
martinsmith99 wrote:
if the lens is scratched, it's scratched, no matter which side points outwards. _________________ Casual attendance these days |
|
| Vissza az elejére |
|
 |
guardian
 Csatlakozott: 2009.03.18. Szerda 20:54 Hozzászólások: 1750
|
 Elküldve: Vas. Márc. 24, 2013 8:25 pm Hozzászólás témája: |
|
 Elküldve: Vas. Márc. 24, 2013 8:25 pm Hozzászólás témája: |
|
|
guardian wrote:
| martinsmith99 írta: |
| if the lens is scratched, it's scratched, no matter which side points outwards. |
Agreed
Lenses bend light, though. Light incident upon the lens's first surface, however, is not yet bent, whereas light exiting the lens already has been bent by the lens's optical properties.
Also, regarding coatings:
If the old surface has imperfections in its coating, owing for example to over-exuberant cleaning, while the flipped lens offers (to incident light) a fresh, new, and perfect coating, would that not be an advantage? Coatings matter too, of course, inside the lens. But would not the coating quality of the first surface matter more? |
|
| Vissza az elejére |
|
 |
visualopsins
 Csatlakozott: 2009.03.05. Csütörtök 19:40 Hozzászólások: 11699 Tartózkodási hely: California
Expire: 2027-07-11
|
 Elküldve: Vas. Márc. 24, 2013 10:55 pm Hozzászólás témája: |
|
 Elküldve: Vas. Márc. 24, 2013 10:55 pm Hozzászólás témája: |
|
|
visualopsins wrote:
I don't think there are any camera lenses with any element having identical curvatures both sides.
If there are any, surely factory couldn't say which side is which, eh?
Rear element scratches show in images, while front element scratches rarely show other than loss of contrast. Scratches show when angle of incidence is steep enough... _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| Vissza az elejére |
|
 |
guardian
 Csatlakozott: 2009.03.18. Szerda 20:54 Hozzászólások: 1750
|
 Elküldve: Hétf. Márc. 25, 2013 12:00 pm Hozzászólás témája: |
|
 Elküldve: Hétf. Márc. 25, 2013 12:00 pm Hozzászólás témája: |
|
|
guardian wrote:
| visualopsins írta: |
I don't think there are any camera lenses with any element having identical curvatures both sides.
If there are any, surely factory couldn't say which side is which, eh?
Rear element scratches show in images, while front element scratches rarely show other than loss of contrast. Scratches show when angle of incidence is steep enough... |
I appreciate your comments. First of all, I should have paid better attention in high school physics!
But just on gut instinct, and thinking about this only following the insight provided by your post, I tend to agree with you about lack of front element symmetry. This is something to which I shall be paying much more attention going forward!!  |
|
| Vissza az elejére |
|
 |
|
|
|
Nem készíthetsz új témákat ebben a fórumban. Nem válaszolhatsz egy témára ebben a fórumban. Nem módosíthatod a hozzászólásaidat a fórumban. Nem törölheted a hozzászólásaidat a fórumban. Nem szavazhatsz ebben fórumban.
|