MFlenses - Új élet a digitális korban
MFLenses 2026

Manuális fókuszú objektívek fóruma

Fedezd fel a régi objektívek világát javítási jegyzetekkel, valódi tesztképekkel és képekkel teli archív témákkal.

Fedezd fel a régi objektívek világát javítási jegyzetekkel, valódi tesztképekkel és képekkel teli archív témákkal.
Reflektorfény

Kiemelt partneri hely a fórum nyitólapján.

Exakta to EOS
Előző téma megtekintése :: Következő téma megtekintése  


Reply

Has anyone tried the latest Big_is adapter yet on a 5D, 5D II or 6D? The auction claims infinity focus is available...

Kattints ide az eBay-en való megtekintéshez

Thanks


Reply

They're both 44mm FFD but the Exakta bayonet is very small, and will easily sit inside a M42 or even M39 mount and the throat of an EOS mount is considerably wider. I dont see why it wouldn't work. big_is are reliable and their quality is excellent.

I'd trust it.

this is 19.99 GBP whereas if you buy from big_is it's a shade under 17GBP


Reply

ManualFocus-G írta:
Has anyone tried the latest Big_is adapter yet on a 5D, 5D II or 6D? The auction claims infinity focus is available...

Kattints ide az eBay-en való megtekintéshez

Thanks


The big_is adapter gives infinity on crop Canon bodies, as philslizzy says the Exakta mount kind of gets recessed back into the wider EF mount. On full frame I'd worry about hitting the mirror.

It won't work at all for the auto-Exakta lenses that have a side arm for the aperture.

Might be easiest to ask big_is if there are any mirror issues, he responded to a question I asked once, his English seems to be OK.


Reply

I've tried it on my old film EOS 650 - it does not hit the mirror but still there is something wrong as my camera shows error - either my batteries are not good either the adapter needs to be thinned a little bit from the bottom part.


Reply

Thanks for the feedback guys. The auction says it fine on a 5D II, so if it doesn't work at least I can get my money back. For info, I don't rate big_is adapters that highly. I have a Contax/Yashica adapter which gave way and my Planar 50/1.4 hit the ground as a result. The springy bit didn't have enough tension.


Reply

http://oldlenses.blogspot.ca/2013/04/an-exakta-to-canon-eos-adapter-that.html


Reply

ManualFocus-G írta:
Thanks for the feedback guys. The auction says it fine on a 5D II, so if it doesn't work at least I can get my money back. For info, I don't rate big_is adapters that highly. I have a Contax/Yashica adapter which gave way and my Planar 50/1.4 hit the ground as a result. The springy bit didn't have enough tension.


Neither me. I had a PB-EOS adapter described as reaching infinity focus that didn't. Seller gave 80% refund. Searching for a reliable adapters provider at ebay...

[]s,

Renato


Reply

std írta:
I've tried it on my old film EOS 650 - it does not hit the mirror but still there is something wrong as my camera shows error - either my batteries are not good either the adapter needs to be thinned a little bit from the bottom part.

I bought from big_is too, work on EOS 1000D
Mine isn't work too on EOS 650 film camera, but when I attached a smart chip on adapter, it worked well.

The adapter has problem with Zeiss exakta mount. like the link Stefan gave. back part of lens must be cut/filed to reach infinity.
my Zeiss exakta include here; Flektogon 20/4, 25/4, tessar 50/2,8, and pancolar 50/2. it works well on Isco, Meyer and schneider.
ohh , my latest orestegon not fit the adapter though. I think making exkata adapter is more complicated than most adapter (C/Y, Nikon etc.)


Reply

i have a big_is exakta-eos adapter, it gives me infinity focus without any problems on my 50D, but with Carl Zeiss exakta lenses, it does not fit because of the aperture "arm", i don't complain about this because even though adapter fit, i could not get aperture change, i have to use it wide open which is not aways a good idea, i also have the silver one, the quality seems to be better but i have some problem with the infinity with it,


Reply

the_x_vision írta:
i have a big_is exakta-eos adapter, it gives me infinity focus without any problems on my 50D, but with Carl Zeiss exakta lenses, it does not fit because of the aperture "arm", i don't complain about this because even though adapter fit, i could not get aperture change, i have to use it wide open which is not aways a good idea, i also have the silver one, the quality seems to be better but i have some problem with the infinity with it,


You can lock the knob on that aperture arm and then your aperture will work.

Push knob down and rotate 1/4 turn counterclockwise, it will lock.

Won't help you much on an EOS body but very helpful for NEX.


Reply

Will the Topcor RE Auto 2.8/100mm hit the mirror on 5dm2?

Thanks.


Reply

and which adapter would you recommend?
I prefer AF or EMF confirm as an additional option to egs screen.


Reply

i have recently bought the black big_is exakta-eos adapter to mount my re topcor 58/1.8 and 135/3.5 and removed the "aperture arm" so it does mount the lens and does allow infinity focus.

however, i either don't understand, or do not like the locking system.

it has no spring and as a result the lens have travel within the adapter while focussing.



does anyone have the same experience, or am i doing something wrong?


Reply

chris_zeel írta:
i have recently bought the black big_is exakta-eos adapter to mount my re topcor 58/1.8 and 135/3.5 and removed the "aperture arm" so it does mount the lens and does allow infinity focus.

however, i either don't understand, or do not like the locking system.

it has no spring and as a result the lens have travel within the adapter while focussing.



does anyone have the same experience, or am i doing something wrong?



anyone?

or any recommendations for a good adapter, especially one that will work with topcor lensen?


thanks for your attention!


Reply

The thin Big-is adapter is OK with infinity focus - at least on crop EOS.
About locking you need to lock the adapter to the lens first and then attach it to the camera.


Reply

std írta:
The thin Big-is adapter is OK with infinity focus - at least on crop EOS.
About locking you need to lock the adapter to the lens first and then attach it to the camera.


I did try to lock it to the lens, however, because it has no spring, the lock is not tight and the clip that holds the pin is loose.

Thanks for helping me out!


Reply

chris_zeel írta:
i have recently bought the black big_is exakta-eos adapter to mount my re topcor 58/1.8 and 135/3.5 and removed the "aperture arm" so it does mount the lens and does allow infinity focus.

however, i either don't understand, or do not like the locking system.

it has no spring and as a result the lens have travel within the adapter while focussing.

....


I don't remember whose adapter it is. It was cheap one of alminum made apparently. It looks like this:
I cut out flange of this adapter not to interfere with shutter button bulge (didn't want to modify the lens).
And you can tighten the screw (P in the photo), so the lens stays put while focusing.


But you have to mount the lens and adapter from this place shown in the photo. (reverse of normal mounting way, a bit tricky)


However its final position is quite right, distance marker on the top as you see.


This method needs one adapter for each lens you have. A nice point is that you can focus with wide open,
then press the button just before shooting. Hopefully there is no too large focus-shift with this Tessar lens.
I have no idea your lens hits the mirror or not, since my 5D's mirror has been shaved.
Btw this lens can focus to infinity, the adapter base is only 0.8mm thin. It should be officially 0.7mm I guess.


Reply

chris_zeel írta:
std írta:
The thin Big-is adapter is OK with infinity focus - at least on crop EOS.
About locking you need to lock the adapter to the lens first and then attach it to the camera.


I did try to lock it to the lens, however, because it has no spring, the lock is not tight and the clip that holds the pin is loose.

Thanks for helping me out!


there is a locking spring to lock exakta lens on bottom the adapter, it's silver,


Reply

I still don't see a spring on my adapter. See these pictures for my lens and adapter and how they 'lock'.









I also bent the two things on top of the 'hook' towards the outside, with the idea that it would get tightened when fitting it on my camera.
This didn't have a satisfactory result, since the 'hook' that holds the locking screw on the lens is slightly oversized compared to the screw.



Any help how I can make this adapter work?


Reply

your second picture shows the adapter lock your lens...


Reply

the_x_vision írta:
your second picture shows the adapter lock your lens...


that is true, the locking works in principle, but the lens is not completely tight in the adapter there is quite some play of the lens in the adapter.
this play comes from the hook that holds the locking pin, which is not can move when the lens is mounted.
but also the flange of the lens is smaller than the part of the adapter that locks it.

so when i mount it on my camera and turn the focus ring, the lens always moves a bit in the adapter with every movement.


maybe this is inevitable with this adapter.

still, if anyone has a rainbow imaging adapter or any other adapter that works well with topcor lenses and want to sell it, please let me know.


Reply

BTW, I see your lens seems have been modified. You can try this adapter too Kattints ide az eBay-en való megtekintéshez.


Reply

Update regarding adapter,

I got this adapter from ebay, from a highly recommended seller, bought many thing from him.
The adapter is well build, but won't fit Topcor Auto lens (100mm f2.Cool.
I also got refund from the seller.

The Topcor Auto lens has an aperture pin sticking out that prevent the lens to mount.

http://www.ebay.com/itm/220987403142?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

Can anyone recommend me an adapter that fit this lens?
Thanks.


Reply

I cannot find any adapter for EOS camera has the slot for aperture pin of Topcon lenses which maintains infinity till now. The thin adapter may not have enough thickness for it to accommodate the aperture pin of the topcon lens. The pin may scratch the camera if one manage mount it with a slot made on the thin adapter.

One way is to trim the aperture pin if one do not mind it may not be usable again on Topcon film camera.