| Előző téma megtekintése :: Következő téma megtekintése |
| Szerző |
Üzenet |
philslizzy
 Csatlakozott: 2012.08.07. Kedd 15:45 Hozzászólások: 4753 Tartózkodási hely: Cheshire, England
|
 Elküldve: Csüt. Okt. 24, 2013 11:33 am Hozzászólás témája: Making pinholes |
|
 Elküldve: Csüt. Okt. 24, 2013 11:33 am Hozzászólás témája: Making pinholes |
|
|
philslizzy wrote:
Hi does anyone know how to make a really nice pinhole without jagged edges, or can I buy a piece if perforated material with a purpose made pinhole in it?? _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Vissza az elejére |
|
 |
iangreenhalgh1
 Csatlakozott: 2011.03.18. Péntek 4:40 Hozzászólások: 15679
Expire: 2014-01-07
|
 Elküldve: Csüt. Okt. 24, 2013 11:55 am Hozzászólás témája: |
|
 Elküldve: Csüt. Okt. 24, 2013 11:55 am Hozzászólás témája: |
|
|
iangreenhalgh1 wrote:
Apparently the way to do it is not to poke the pin all the way through, but to make an indent, then rub the nipple you have formed on emery paper until you get a small hole. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Vissza az elejére |
|
 |
alm001
 Csatlakozott: 2013.09.13. Péntek 20:07 Hozzászólások: 67 Tartózkodási hely: New England
|
 Elküldve: Csüt. Okt. 24, 2013 12:52 pm Hozzászólás témája: |
|
 Elküldve: Csüt. Okt. 24, 2013 12:52 pm Hozzászólás témája: |
|
|
alm001 wrote:
I've also heard spinning a needle into the metal would help. _________________ -Andrew
DSLR: Canon Rebel XS
SLR: Canon Rebel 2000, Rebel G, Rebel 750
m42: Rikenon 55mm f1.4, Continental 135mm f2.8
EOS: 17-40mm f4L, 50mm f1.4
Others: Cosmicar 12.5mm f1.8 |
|
| Vissza az elejére |
|
 |
Jesito
 Csatlakozott: 2007.08.24. Péntek 1:03 Hozzászólások: 5745 Tartózkodási hely: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Elküldve: Csüt. Okt. 24, 2013 1:12 pm Hozzászólás témája: |
|
 Elküldve: Csüt. Okt. 24, 2013 1:12 pm Hozzászólás témája: |
|
|
Jesito wrote:
The pro ones are built by a laser punch. Difficult to do it at home  _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Vissza az elejére |
|
 |
iangreenhalgh1
 Csatlakozott: 2011.03.18. Péntek 4:40 Hozzászólások: 15679
Expire: 2014-01-07
|
 Elküldve: Csüt. Okt. 24, 2013 1:22 pm Hozzászólás témája: |
|
 Elküldve: Csüt. Okt. 24, 2013 1:22 pm Hozzászólás témája: |
|
|
iangreenhalgh1 wrote:
This guy used a 3W 450nm laser to cut a hole through cardboard.
Whether it would work for metal and the beam is sufficiently thin I don't know.
 _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Vissza az elejére |
|
 |
Himself
 Csatlakozott: 2007.03.01. Csütörtök 0:54 Hozzászólások: 3315 Tartózkodási hely: Montreal
Expire: 2013-05-30
|
 Elküldve: Csüt. Okt. 24, 2013 4:20 pm Hozzászólás témája: |
|
 Elküldve: Csüt. Okt. 24, 2013 4:20 pm Hozzászólás témája: |
|
|
Himself wrote:
Drill press with a drill press vise. Or some clamps instead of vise.
Fix a needle in the chuck. An insulin syringe needle.
That`s the way I`d do it. _________________ Moderator Himself |
|
| Vissza az elejére |
|
 |
David
 Csatlakozott: 2011.04.13. Szerda 18:53 Hozzászólások: 1869 Tartózkodási hely: Denver, Colorado
Expire: 2013-01-25
|
 Elküldve: Csüt. Okt. 24, 2013 5:09 pm Hozzászólás témája: |
|
 Elküldve: Csüt. Okt. 24, 2013 5:09 pm Hozzászólás témája: |
|
|
David wrote:
I bought two pinholes from eBay that were laser drilled and perfectly circular. They both diffract more and are softer than ones I made pushing a pin through tin foil and aluminum can bodies. In fact, one one of the latter I managed a pinhole that's so sharp it captures tree leaf details at 40 feet. I'm of the might right now that, with pinholes, it's very fast to reach a point of diminished returns. _________________ http://www.youtube.com/user/hancockDavidM |
|
| Vissza az elejére |
|
 |
philslizzy
 Csatlakozott: 2012.08.07. Kedd 15:45 Hozzászólások: 4753 Tartózkodási hely: Cheshire, England
|
 Elküldve: Csüt. Okt. 24, 2013 11:01 pm Hozzászólás témája: |
|
 Elküldve: Csüt. Okt. 24, 2013 11:01 pm Hozzászólás témája: |
|
|
philslizzy wrote:
Thanks for your help there, Thats interesting, David that a punched pinhole of the type I am trying to avoid will give better results than a bought one. I'll try it. Ian's suggestion of sanding down a nipple might work. On tin foil I mean. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Vissza az elejére |
|
 |
Lloydy
 Csatlakozott: 2009.09.02. Szerda 17:36 Hozzászólások: 7880 Tartózkodási hely: Ironbridge. UK.
Expire: 2022-01-01
|
 Elküldve: Csüt. Okt. 24, 2013 11:45 pm Hozzászólás témája: |
|
 Elküldve: Csüt. Okt. 24, 2013 11:45 pm Hozzászólás témája: |
|
|
Lloydy wrote:
Clamp the plate you want to drill between two other thicker plates and clamp them very firmly as close to where you want to drill as possible, use heavy washers to get the plates as tight as you can and drill through the washer hole, then drill the hole with a model makers drill bit in a dremel or with a spiral drill - http://www2.westfalia.net/shops/tools/hand_tools/gimlets/an_assortment_of_gimlets/411275-mini_hand_drill.htm
which you can get from Hobbycraft for a few pounds.
The other alternative is to glue the sheet you want the hole in between two other sheets with a glue that will melt with heat, but it needs to be a thin layer.
The idea is to prevent burrs by not allowing any space for them to form on the plate you need, so it must be a thin layer of glue or very firmly clamped. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Vissza az elejére |
|
 |
iangreenhalgh1
 Csatlakozott: 2011.03.18. Péntek 4:40 Hozzászólások: 15679
Expire: 2014-01-07
|
 Elküldve: Pént. Okt. 25, 2013 12:26 am Hozzászólás témája: |
|
 Elküldve: Pént. Okt. 25, 2013 12:26 am Hozzászólás témája: |
|
|
iangreenhalgh1 wrote:
Let us know how you get on Phil as I have been thinking of trying pinhole. I have loads of paper and x-ray film, both are very slow, I thought of going to see my mate who owns a carpet shop and getting a lump of the large diameter cardboard tube from the middle of the carpet rolls to make a cylindrical pinhole camera that takes really big negatives, such as 12x18 inches. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Vissza az elejére |
|
 |
Jesito
 Csatlakozott: 2007.08.24. Péntek 1:03 Hozzászólások: 5745 Tartózkodási hely: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Elküldve: Pént. Okt. 25, 2013 7:12 am Hozzászólás témája: |
|
 Elküldve: Pént. Okt. 25, 2013 7:12 am Hozzászólás témája: |
|
|
Jesito wrote:
Found at Wikipedia:
Selection of pinhole size:
Within limits, a smaller pinhole (with a thinner surface that the hole goes through) will result in sharper image resolution because the projected circle of confusion at the image plane is practically the same size as the pinhole. An extremely small hole, however, can produce significant diffraction effects and a less clear image due to the wave properties of light.[11] Additionally, vignetting occurs as the diameter of the hole approaches the thickness of the material in which it is punched, because the sides of the hole obstruct the light entering at anything other than 90 degrees.
The best pinhole is perfectly round (since irregularities cause higher-order diffraction effects), and in an extremely thin piece of material. Industrially produced pinholes benefit from laser etching, but a hobbyist can still produce pinholes of sufficiently high quality for photographic work.
One method is to start with a sheet of brass shim or metal reclaimed from an aluminium drinks can or tin foil/aluminum foil, use fine sand paper to reduce the thickness of the centre of the material to the minimum, before carefully creating a pinhole with a suitably sized needle.
A method of calculating the optimal pinhole diameter was first attempted by Jozef Petzval. The crispest image is obtained using a pinhole size determined by the formula:
d=\sqrt{2f\lambda}
where d is pinhole diameter, f is focal length (distance from pinhole to image plane) and λ is the wavelength of light.
For standard black-and-white film, a wavelength of light corresponding to yellow-green (550 nm) should yield optimum results. For a pinhole-to-film distance of 1 inch (25 mm), this works out to a pinhole 0.17 mm in diameter.[13] For 5 cm, the appropriate diameter is 0.23 mm.
The depth of field is basically infinite, but this does not mean that no optical blurring occurs. The infinite depth of field means that image blur depends not on object distance, but on other factors, such as the distance from the aperture to the film plane, the aperture size, and the wavelength(s) of the light source. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Vissza az elejére |
|
 |
ZoneV
 Csatlakozott: 2009.11.09. Hétfő 8:57 Hozzászólások: 1633 Tartózkodási hely: Germany
Expire: 2011-12-02
|
 Elküldve: Pént. Okt. 25, 2013 8:11 am Hozzászólás témája: |
|
 Elküldve: Pént. Okt. 25, 2013 8:11 am Hozzászólás témája: |
|
|
ZoneV wrote:
On my Photo Tinker Directory are some links with pinhole building instructions:
Here two of them:
German, but the way sounds good, electric pinhole burning with a needle and capacitor, and 12V voltage supply:
http://www.jochen-reincke.de/lochkam/loecher.htm
http://web.archive.org/web/20031006023328/http://www.pinhole.com/resources/articles/poke.php
For a bigger ~2mm hole for an iris I tested the sun focused with a lens. For pinholes CCTV lenses or such with short focal length could probably work for pinholes. I think focal lengths ~20mm and shorter.
I worked handholding the lens, that was bad, but with fixed lens and probably a grey filter one could aim and focus, a black paper in front of the lens could be the shutter for the "burning exposure".
Don´t look through the lens! _________________ Camera modification, repair and DIY - some links to look through: http://www.4photos.de/camera-diy/index-en.html
I AM A LENS NERD!
Epis, Elmaron, Emerald, Ernostar, Helioplan and Heidosmat.
Epiotar, Kameraobjektiv, Anastigmat, Epis, Meganast, Magnagon, Quinar, Culmigon, Novotrinast, Novflexar, Colorplan, Sekor, Kinon, Talon, Telemegor, Xenon, Xenar, Ultra, Ultra Star. Tessar, Janar, Visionar, Kiptar, Kipronar and Rotelar.
|
|
| Vissza az elejére |
|
 |
Lloydy
 Csatlakozott: 2009.09.02. Szerda 17:36 Hozzászólások: 7880 Tartózkodási hely: Ironbridge. UK.
Expire: 2022-01-01
|
 Elküldve: Pént. Okt. 25, 2013 9:09 am Hozzászólás témája: |
|
 Elküldve: Pént. Okt. 25, 2013 9:09 am Hozzászólás témája: |
|
|
Lloydy wrote:
http://www.bbc.co.uk/news/in-pictures-22150973
good stuff.  _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Vissza az elejére |
|
 |
philslizzy
 Csatlakozott: 2012.08.07. Kedd 15:45 Hozzászólások: 4753 Tartózkodási hely: Cheshire, England
|
 Elküldve: Szomb. Okt. 26, 2013 12:01 am Hozzászólás témája: |
|
 Elküldve: Szomb. Okt. 26, 2013 12:01 am Hozzászólás témája: |
|
|
philslizzy wrote:
Thanks for this, I had wondered if you'd get diffraction from too small a pinhole. The coke can and the sanded-down nipple sounds like a good combination _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Vissza az elejére |
|
 |
|
|