| Előző téma megtekintése :: Következő téma megtekintése |
| Szerző |
Üzenet |
shad309
 Csatlakozott: 2008.03.08. Szombat 19:24 Hozzászólások: 453 Tartózkodási hely: Illinois, USA
|
 Elküldve: Csüt. Ápr. 17, 2008 11:56 pm Hozzászólás témája: Lens Cleaners |
|
 Elküldve: Csüt. Ápr. 17, 2008 11:56 pm Hozzászólás témája: Lens Cleaners |
|
|
shad309 wrote:
I had a friend that does camera repairs recommend a cleaner called R.O.R. Has anyone here used it? Supposedly he started using it after a some repair companies suggested it and that it's supposed to be the best on the market.
http://www.ror.net/ _________________ Canon 400D & 350D
Lenses- German, Japanese, & Russian |
|
| Vissza az elejére |
|
 |
bob955i
 Csatlakozott: 2007.04.15. Vasárnap 10:00 Hozzászólások: 2495
|
 Elküldve: Pént. Ápr. 18, 2008 9:18 pm Hozzászólás témája: |
|
 Elküldve: Pént. Ápr. 18, 2008 9:18 pm Hozzászólás témája: |
|
|
bob955i wrote:
Might be similar to Opticlean which is a clear liquid that is painted onto the glass and allowed to cure. The liquid then forms a skin that you peel off thus removing contaminants. |
|
| Vissza az elejére |
|
 |
Orio
Csatlakozott: 2007.02.24. Szombat 18:17 Hozzászólások: 29545 Tartózkodási hely: West Emilia
Expire: 2012-12-04
|
 Elküldve: Pént. Ápr. 18, 2008 9:50 pm Hozzászólás témája: |
|
 Elküldve: Pént. Ápr. 18, 2008 9:50 pm Hozzászólás témája: |
|
|
Orio wrote:
Be very careful with those things. Some coating layers (e.g. that of the Jupiter-37) are very thin and very easily damaged even by simple cloth actions, let alone by peeling films. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Vissza az elejére |
|
 |
shad309
 Csatlakozott: 2008.03.08. Szombat 19:24 Hozzászólások: 453 Tartózkodási hely: Illinois, USA
|
 Elküldve: Pént. Ápr. 18, 2008 10:58 pm Hozzászólás témája: |
|
 Elküldve: Pént. Ápr. 18, 2008 10:58 pm Hozzászólás témája: |
|
|
shad309 wrote:
It's not like Opticlean. It's a liquid and gets the residual oils and contaminants off that other solutions wont.
I talked with a Canon rep today and he said their techs use it and recommend using it once every 6 months- no more, no less. They also claim that you should gain 1/4 to 1/2 stop on metering because it's so good.
I think I am going to give it a shot on cheap glass first. _________________ Canon 400D & 350D
Lenses- German, Japanese, & Russian |
|
| Vissza az elejére |
|
 |
Orio
Csatlakozott: 2007.02.24. Szombat 18:17 Hozzászólások: 29545 Tartózkodási hely: West Emilia
Expire: 2012-12-04
|
 Elküldve: Pént. Ápr. 18, 2008 11:02 pm Hozzászólás témája: |
|
 Elküldve: Pént. Ápr. 18, 2008 11:02 pm Hozzászólás témája: |
|
|
Orio wrote:
| shad309 írta: |
| They also claim that you should gain 1/4 to 1/2 stop on metering because it's so good. |
hm... well, I am not a technician, but this sentence really sounds to me quite absurd. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Vissza az elejére |
|
 |
shad309
 Csatlakozott: 2008.03.08. Szombat 19:24 Hozzászólások: 453 Tartózkodási hely: Illinois, USA
|
 Elküldve: Pént. Ápr. 18, 2008 11:13 pm Hozzászólás témája: |
|
 Elküldve: Pént. Ápr. 18, 2008 11:13 pm Hozzászólás témája: |
|
|
shad309 wrote:
Yeah, I want to see the results for myself. The reason they state that is contaminants and residual oils are deposited on the glass and the removal increases the light that is able to enter the lens.
I did a little digging on the net and found many people giving the same claim. Once I have tested this myself, I will post the results. I will give metering examples under same lighting conditions etc.... and see what happens.
But then again some people say to use Vodka and get great results too  _________________ Canon 400D & 350D
Lenses- German, Japanese, & Russian |
|
| Vissza az elejére |
|
 |
Ken_L
Csatlakozott: 2008.08.04. Hétfő 21:18 Hozzászólások: 1 Tartózkodási hely: Virginia, USA
|
 Elküldve: Hétf. Aug. 04, 2008 11:01 pm Hozzászólás témája: |
|
 Elküldve: Hétf. Aug. 04, 2008 11:01 pm Hozzászólás témája: |
|
|
Ken_L wrote:
I've been using the R.O.R. for a while now. It works quite well for removing the residual oils from a lens - however, it does leave a slight film of its own after cleaning, which I remove using an alcohol based lens cleaner. It seems that the R.O.R. is a detergent based, which would account for the film.
I don't know about the claim of a 1/4 to 1/2 stop difference after cleaning. The cameras I've used it on were mostly thrift shop purchases, often with decades worth of accumulated gunk and grime on them, and the R.O.R. did an excellent job in cleaning them. On these cameras, the difference wasn't a mere 1/4 to 1/2 stop - it was probably closer to 4 or 5 stops...
I don't use R.O.R. as my regular cleaner because of the film it leaves, but I do use it occasionally (maybe once a year or so) for cleaning, as it seems to do an excellent job. |
|
| Vissza az elejére |
|
 |
Attila
 Csatlakozott: 2007.02.24. Szombat 20:36 Hozzászólások: 58002
Expire: 2025-11-18
|
 Elküldve: Hétf. Aug. 04, 2008 11:05 pm Hozzászólás témája: |
|
 Elküldve: Hétf. Aug. 04, 2008 11:05 pm Hozzászólás témája: |
|
|
Attila wrote:
Nice to see you here Ken! |
|
| Vissza az elejére |
|
 |
Stan
Csatlakozott: 2008.08.14. Csütörtök 19:01 Hozzászólások: 34 Tartózkodási hely: Seattle, WA, USA
|
 Elküldve: Kedd. Aug. 19, 2008 6:10 am Hozzászólás témája: |
|
 Elküldve: Kedd. Aug. 19, 2008 6:10 am Hozzászólás témája: |
|
|
Stan wrote:
Orio, I agree. The lens should be REALLY dirty to get 1/2 or 1/4 gain after cleaning.
I, personally, use zippo lighter fuel. I am satisfied with the results. |
|
| Vissza az elejére |
|
 |
naplam
 Csatlakozott: 2007.03.22. Csütörtök 17:58 Hozzászólások: 480 Tartózkodási hely: Spain
Expire: 2013-11-30
|
 Elküldve: Kedd. Aug. 19, 2008 10:47 am Hozzászólás témája: |
|
 Elküldve: Kedd. Aug. 19, 2008 10:47 am Hozzászólás témája: |
|
|
naplam wrote:
From the ROR website:
| Idézet: |
| When I first started using it on customers' lenses and filters, after receiving their repaired lenses they would call to say that I had forgotten to "return the filter" or "didn't put the front lens element back in." I explained that everything was indeed intact and that they should look closer -- the lenses and filters were so clean that the customers couldn't see them! |
More absurd marketing lies. ROR may be alright for removing oils/grease but even a 1 stop gain is absurd, that would be twice the light. Customers thinking the front lens element is missing? come on  |
|
| Vissza az elejére |
|
 |
Stan
Csatlakozott: 2008.08.14. Csütörtök 19:01 Hozzászólások: 34 Tartózkodási hely: Seattle, WA, USA
|
 Elküldve: Kedd. Aug. 19, 2008 3:37 pm Hozzászólás témája: |
|
 Elküldve: Kedd. Aug. 19, 2008 3:37 pm Hozzászólás témája: |
|
|
Stan wrote:
Naplam,
I agree 110%.  _________________ Canon 400D
Canon FD 50/1.8 S.C.(converted to M42)
Auto-Topcor 35/2.8(converted to M42)
Mamiya/Sekor 55/1.4
Mamiya/Sekor 135/2.8
Konica AR 40/1.8 (converted to EOS) |
|
| Vissza az elejére |
|
 |
Farside
 Csatlakozott: 2007.09.01. Szombat 22:00 Hozzászólások: 6579 Tartózkodási hely: Ireland
Expire: 2013-12-27
|
 Elküldve: Kedd. Aug. 19, 2008 3:59 pm Hozzászólás témája: |
|
 Elküldve: Kedd. Aug. 19, 2008 3:59 pm Hozzászólás témája: |
|
|
Farside wrote:
| naplam írta: |
From the ROR website:
| Idézet: |
| When I first started using it on customers' lenses and filters, after receiving their repaired lenses they would call to say that I had forgotten to "return the filter" or "didn't put the front lens element back in." I explained that everything was indeed intact and that they should look closer -- the lenses and filters were so clean that the customers couldn't see them! |
More absurd marketing lies. ROR may be alright for removing oils/grease but even a 1 stop gain is absurd, that would be twice the light. Customers thinking the front lens element is missing? come on  |
Indeed - they do themselves no favours by including such b*ll*cks - totally blows their credibility out of the water. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| Vissza az elejére |
|
 |
voytek
 Csatlakozott: 2009.11.24. Kedd 17:55 Hozzászólások: 897
|
 Elküldve: Pént. Aug. 22, 2008 4:03 am Hozzászólás témája: |
|
 Elküldve: Pént. Aug. 22, 2008 4:03 am Hozzászólás témája: |
|
|
voytek wrote:
Go to www.promaster.com then to accessories from the left side menu and choose cleaning supplies. I use theirs Optic Cleaner and didn't recognize yet any damage to the lens coating . However there is an information (small print) to avoid use it on contact lenses. In Chicago area -Helix Camera (Chicago, Highland Park) 2 fl oz costs $3.99 retail _________________ Cheers, Voytek |
|
| Vissza az elejére |
|
 |
|
|
|
Nem készíthetsz új témákat ebben a fórumban. Nem válaszolhatsz egy témára ebben a fórumban. Nem módosíthatod a hozzászólásaidat a fórumban. Nem törölheted a hozzászólásaidat a fórumban. Nem szavazhatsz ebben fórumban.
|