| Előző téma megtekintése :: Következő téma megtekintése |
| Szerző |
Üzenet |
TurtleSkinny
 Csatlakozott: 2020.01.15. Szerda 10:56 Hozzászólások: 70 Tartózkodási hely: Italy
|
 Elküldve: Szomb. Dec. 19, 2020 12:57 pm Hozzászólás témája: How to store the photos? |
|
 Elküldve: Szomb. Dec. 19, 2020 12:57 pm Hozzászólás témája: How to store the photos? |
|
|
TurtleSkinny wrote:
Until now I have never cared about this aspect but I want to improve to give a long life to the photos.
I usually print photographs in A4 and A3 format and lately I have relied on Digitalpix.it with excellent results. For these formats they use Fujicolor Crystal Archive Paper Supreme. The data sheet indicates the following:
| Idézet: |
Since prints are usually used for the long term recording of images, as much effort as possible is made to use materials that exhibit the least amount of change over time. But the effects of high force during folding, light, heat, oxygen in the air, contaminating gases, humidity and mold cannot be completely avoided. Also the change in the photographic image or base material are minimized by maintaining the appropriate storage conditions for prints, such as those used by museums and art galleries. Temperature and humidity control is the most important key to minimizing the change that occurs in prints. Prints stored in the dark under the following conditions may be expected to show almost no change over time.
Storage period with almost no change - Temperature - Relative Humidity
More than 20 years - Below 10°C (50°F) - 30% — 50%
10/20 years - Below 25°C (77°F) - 30% — 50%
Notes on Prints Storage:
1. Prints should be inserted into albums, mounted, or placed into a bag (plastic*) for photographic prints before being stored.
*Made of polyester, polystyrene or polypropylene plastic, etc
2. Even during normal storage, it is recommended that prints be stored at a place as free as possible from hot and humid conditions, and away from direct illumination. The following are examples of undesirable storage conditions.
> Storage in a room closet facing a wall exposed to cold outside air (which may cause condensation).
> Storage in a place near the ceiling, such as an attic, the top of a closet or cupboard (where high temperatures may occur).
3. Storing prints with their front surfaces facing each other may result in unexpected problems. If the adjacent print placement is unavoidable, it is necesaary to keep the surface separated by, for example, the use of interleaving sheets of paper. |
I was amazed by the declared "life" expectancy, can it be so short? I have family photos that are over 50/60 years old which, although poorly preserved, have kept very well. Current chemical technologies are worse than those of half a century ago.
I want to put the photos in polypropylene bags and then store them in archival boxes:
Bags : https://www.amazon.it/Favorit-400053790-Foratura-Universale-Confezione/dp/B014BE3K4I/ref=psdc_4290225031_t1_B000KT78VK
Boxes : https://www.amazon.it/dp/B00VAKYNB6
How do you do it? _________________ I use Google Translate, sorry  |
|
| Vissza az elejére |
|
 |
visualopsins
 Csatlakozott: 2009.03.05. Csütörtök 19:40 Hozzászólások: 11697 Tartózkodási hely: California
Expire: 2027-07-11
|
 Elküldve: Szomb. Dec. 19, 2020 2:53 pm Hozzászólás témája: |
|
 Elküldve: Szomb. Dec. 19, 2020 2:53 pm Hozzászólás témája: |
|
|
visualopsins wrote:
Raw digital image files are stored on multiple hard drives. _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| Vissza az elejére |
|
 |
TurtleSkinny
 Csatlakozott: 2020.01.15. Szerda 10:56 Hozzászólások: 70 Tartózkodási hely: Italy
|
 Elküldve: Szomb. Dec. 19, 2020 3:19 pm Hozzászólás témája: |
|
 Elküldve: Szomb. Dec. 19, 2020 3:19 pm Hozzászólás témája: |
|
|
TurtleSkinny wrote:
| visualopsins írta: |
| Raw digital image files are stored on multiple hard drives. |
You wrote in the wrong thread _________________ I use Google Translate, sorry  |
|
| Vissza az elejére |
|
 |
Blazer0ne
 Csatlakozott: 2018.09.12. Szerda 18:33 Hozzászólások: 836
Expire: 2024-12-07
|
 Elküldve: Szomb. Dec. 19, 2020 3:47 pm Hozzászólás témája: Re: How to store the photos? |
|
 Elküldve: Szomb. Dec. 19, 2020 3:47 pm Hozzászólás témája: Re: How to store the photos? |
|
|
Blazer0ne wrote:
...
A hozzászólás legutóbb Blazer0ne által Kedd. Feb. 22, 2022 6:40 pm-kor lett szerkesztve, összesen 1 alkalommal. |
|
| Vissza az elejére |
|
 |
TurtleSkinny
 Csatlakozott: 2020.01.15. Szerda 10:56 Hozzászólások: 70 Tartózkodási hely: Italy
|
 Elküldve: Szomb. Dec. 19, 2020 3:52 pm Hozzászólás témája: Re: How to store the photos? |
|
 Elküldve: Szomb. Dec. 19, 2020 3:52 pm Hozzászólás témája: Re: How to store the photos? |
|
|
TurtleSkinny wrote:
| Blazer0ne írta: |
| Never used this paper. How long has it been on the market? |
I don't know
Info : https://www.fujifilm.eu/it/prodotti/photo-finishing/p/fujicolor-crystal-archive-paper-supreme#overview
I have now read online that these prints have a life of 80 years if placed in the dark. _________________ I use Google Translate, sorry  |
|
| Vissza az elejére |
|
 |
Blazer0ne
 Csatlakozott: 2018.09.12. Szerda 18:33 Hozzászólások: 836
Expire: 2024-12-07
|
 Elküldve: Szomb. Dec. 19, 2020 4:14 pm Hozzászólás témája: Re: How to store the photos? |
|
 Elküldve: Szomb. Dec. 19, 2020 4:14 pm Hozzászólás témája: Re: How to store the photos? |
|
|
Blazer0ne wrote:
... |
|
| Vissza az elejére |
|
 |
xigame
Csatlakozott: 2022.11.02. Szerda 12:13 Hozzászólások: 1
|
 Elküldve: Szer. Nov. 02, 2022 12:20 pm Hozzászólás témája: |
|
 Elküldve: Szer. Nov. 02, 2022 12:20 pm Hozzászólás témája: |
|
|
xigame wrote:
Sorry for Bumping up this old post but I would like to thank you for starting this post related to this issue which I am also looking and I have also found the solution to it by visiting this post thanks... _________________ xigame vive, |
|
| Vissza az elejére |
|
 |
Ricon
Csatlakozott: 2021.04.18. Vasárnap 12:42 Hozzászólások: 25
|
 Elküldve: Vas. Nov. 06, 2022 2:03 am Hozzászólás témája: |
|
 Elküldve: Vas. Nov. 06, 2022 2:03 am Hozzászólás témája: |
|
|
Ricon wrote:
So many debates on this and I am confident archiving prints is quite simple.
Keep light and air off the print, it will last decades. Nothing else really matters.
My comments come from print evaluation over a 40 year period. I am yet to see a single print that exhibits anything different to what I stated above. |
|
| Vissza az elejére |
|
 |
RokkorDoctor
 Csatlakozott: 2021.11.27. Szombat 15:19 Hozzászólások: 1562 Tartózkodási hely: Kent, UK
Expire: 2025-05-01
|
 Elküldve: Vas. Nov. 06, 2022 12:17 pm Hozzászólás témája: |
|
 Elküldve: Vas. Nov. 06, 2022 12:17 pm Hozzászólás témája: |
|
|
RokkorDoctor wrote:
| Ricon írta: |
So many debates on this and I am confident archiving prints is quite simple.
Keep light and air off the print, it will last decades. Nothing else really matters.
My comments come from print evaluation over a 40 year period. I am yet to see a single print that exhibits anything different to what I stated above. |
Surely humidity (and possibly temperature) would be a consideration also? _________________ Mark
SONY A7S, A7RII + dust-sealed modded Novoflex/Fotodiox/Rayqual MD-NEX adapters
Minolta SR-1, SRT-101/303, XD7/XD11, XGM, X700
Bronica SQAi
Ricoh GX100
Minolta majority of all Rokkor SR/AR/MC/MD models made
Sigma 14mm/3.5 for SR mount
Tamron SP 60B 300mm/2.8 (Adaptall)
Samyang T-S 24mm/3.5 (Nikon mount, DIY converted to SR mount)
Schneider-Kreuznach PC-Super-Angulon 28mm/2.8 (SR mount)
Bronica PS 35/40/50/65/80/110/135/150/180/200/250mm |
|
| Vissza az elejére |
|
 |
cooltouch
 Csatlakozott: 2009.01.15. Csütörtök 16:28 Hozzászólások: 9096 Tartózkodási hely: Houston, Texas
|
 Elküldve: Vas. Nov. 06, 2022 9:53 pm Hozzászólás témája: |
|
 Elküldve: Vas. Nov. 06, 2022 9:53 pm Hozzászólás témája: |
|
|
cooltouch wrote:
I suppose the preservation of prints is important, especially if they were subject to "darkroom magic" when being developed. But it is because of the relative fragility of prints themselves that I've always preferred to archive my negatives and slides to the greatest degree possible: archival sleeves, controlled temperature and humidity. For the most part, this has served me well. I have some Fujichrome slides -- E-6 and not known for archival stability -- that are now 39 years old and little if any color shift has occurred. By this same token, however, I have other E-6 sliides that are definitely beginning to show a shift. So, it has been my policy, ever since I've possessed the means, to archive my photos, both slides and negatives, digitally. And then to keep good track of the digital archives. Which can be a bigger job than one might think, and which is an oft-debated topic on its own. But I still don't see any real long-term solution other than what I'm doing now. So, I suppose you could say that I look at prints, especially color ones, as being disposable and replaceable. _________________ Michael
My Gear List: http://michaelmcbroom.com/photo/gear.html
My Gallery: http://michaelmcbroom.com/gallery3/index.php/
My Flickr Page: https://www.flickr.com/photos/11308754@N08/albums
My Music: https://soundcloud.com/michaelmcbroom/albums
My Blog: http://michaelmcbroom.com/blogistan/ |
|
| Vissza az elejére |
|
 |
Ricon
Csatlakozott: 2021.04.18. Vasárnap 12:42 Hozzászólások: 25
|
 Elküldve: Szer. Nov. 09, 2022 9:21 am Hozzászólás témája: |
|
 Elküldve: Szer. Nov. 09, 2022 9:21 am Hozzászólás témája: |
|
|
Ricon wrote:
| RokkorDoctor írta: |
| Ricon írta: |
So many debates on this and I am confident archiving prints is quite simple.
Keep light and air off the print, it will last decades. Nothing else really matters.
My comments come from print evaluation over a 40 year period. I am yet to see a single print that exhibits anything different to what I stated above. |
Surely humidity (and possibly temperature) would be a consideration also? |
Absolutely not.
I'll an give example, I've had stored a bunch of 8x10 Epson prints created with the first generation of inkjet inks.
These inks were fading in under 12 months. It's because of this deterioration companies started looking at improving the archival aspect and did improve their subsequent inks.
The 8x10's I've had stored were stored as I mentioned in my previous post.
They have sat in a room that has varying humidity and temps that range from around 7 degrees celsius in the winter to over 40 degrees in the summer.
These prints are now pushing 25 years old and always been under these same conditions. They look like they came fresh off the printer 25 minutes ago.
I could give many other examples as I have had many prints created using various processes and I have not seen anything that does not fall under my statement in my previous post.
Manufacturers claims and tests all mean nothing. I've now had long enough to put prints through real world archival tests.
My wedding photos were printed on the highest quality Kodak papers of the past using traditional printing.
Hung in a relatively temperature and humidity controlled environment, out of any harsh light, framed prints and in an album, they are all drastically fading and color shifting.
The Epson inkjet prints however are pristine.
I also have a 40-60 inch print hung which apparently should last 100 years. Shame I won't be around to see if it lasts the entire warranty period.
Maybe my daughter can make a public comment on it in the future and give an update on the state of the Epson 8x10's. lol |
|
| Vissza az elejére |
|
 |
visualopsins
 Csatlakozott: 2009.03.05. Csütörtök 19:40 Hozzászólások: 11697 Tartózkodási hely: California
Expire: 2027-07-11
|
 Elküldve: Szer. Nov. 09, 2022 8:36 pm Hozzászólás témája: |
|
 Elküldve: Szer. Nov. 09, 2022 8:36 pm Hozzászólás témája: |
|
|
visualopsins wrote:
| Ricon írta: |
| RokkorDoctor írta: |
| Ricon írta: |
So many debates on this and I am confident archiving prints is quite simple.
Keep light and air off the print, it will last decades. Nothing else really matters.
My comments come from print evaluation over a 40 year period. I am yet to see a single print that exhibits anything different to what I stated above. |
Surely humidity (and possibly temperature) would be a consideration also? |
Absolutely not.
I'll an give example, I've had stored a bunch of 8x10 Epson prints created with the first generation of inkjet inks.
These inks were fading in under 12 months. It's because of this deterioration companies started looking at improving the archival aspect and did improve their subsequent inks.
The 8x10's I've had stored were stored as I mentioned in my previous post.
They have sat in a room that has varying humidity and temps that range from around 7 degrees celsius in the winter to over 40 degrees in the summer.
These prints are now pushing 25 years old and always been under these same conditions. They look like they came fresh off the printer 25 minutes ago.
I could give many other examples as I have had many prints created using various processes and I have not seen anything that does not fall under my statement in my previous post.
Manufacturers claims and tests all mean nothing. I've now had long enough to put prints through real world archival tests.
My wedding photos were printed on the highest quality Kodak papers of the past using traditional printing.
Hung in a relatively temperature and humidity controlled environment, out of any harsh light, framed prints and in an album, they are all drastically fading and color shifting.
The Epson inkjet prints however are pristine.
I also have a 40-60 inch print hung which apparently should last 100 years. Shame I won't be around to see if it lasts the entire warranty period.
Maybe my daughter can make a public comment on it in the future and give an update on the state of the Epson 8x10's. lol |
Absolutely -- your temperature and humidity are obviously within limits...outside those limits, however... _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| Vissza az elejére |
|
 |
RokkorDoctor
 Csatlakozott: 2021.11.27. Szombat 15:19 Hozzászólások: 1562 Tartózkodási hely: Kent, UK
Expire: 2025-05-01
|
 Elküldve: Szer. Nov. 09, 2022 8:45 pm Hozzászólás témája: |
|
 Elküldve: Szer. Nov. 09, 2022 8:45 pm Hozzászólás témája: |
|
|
RokkorDoctor wrote:
| Ricon írta: |
| RokkorDoctor írta: |
| Ricon írta: |
So many debates on this and I am confident archiving prints is quite simple.
Keep light and air off the print, it will last decades. Nothing else really matters.
My comments come from print evaluation over a 40 year period. I am yet to see a single print that exhibits anything different to what I stated above. |
Surely humidity (and possibly temperature) would be a consideration also? |
Absolutely not.
I'll an give example, I've had stored a bunch of 8x10 Epson prints created with the first generation of inkjet inks.
These inks were fading in under 12 months. It's because of this deterioration companies started looking at improving the archival aspect and did improve their subsequent inks.
The 8x10's I've had stored were stored as I mentioned in my previous post.
They have sat in a room that has varying humidity and temps that range from around 7 degrees celsius in the winter to over 40 degrees in the summer.
These prints are now pushing 25 years old and always been under these same conditions. They look like they came fresh off the printer 25 minutes ago.
I could give many other examples as I have had many prints created using various processes and I have not seen anything that does not fall under my statement in my previous post.
Manufacturers claims and tests all mean nothing. I've now had long enough to put prints through real world archival tests.
My wedding photos were printed on the highest quality Kodak papers of the past using traditional printing.
Hung in a relatively temperature and humidity controlled environment, out of any harsh light, framed prints and in an album, they are all drastically fading and color shifting.
The Epson inkjet prints however are pristine.
I also have a 40-60 inch print hung which apparently should last 100 years. Shame I won't be around to see if it lasts the entire warranty period.
Maybe my daughter can make a public comment on it in the future and give an update on the state of the Epson 8x10's. lol |
OK,
but photographic (and inkjet) prints have a paper base (well, most anyway). Prolonged exposure of paper to high humidity (>65% RH or worse) can result in significant damage due to mould (UK) / mold (US). There is more to print preservation than avoiding fading/shifting colours... _________________ Mark
SONY A7S, A7RII + dust-sealed modded Novoflex/Fotodiox/Rayqual MD-NEX adapters
Minolta SR-1, SRT-101/303, XD7/XD11, XGM, X700
Bronica SQAi
Ricoh GX100
Minolta majority of all Rokkor SR/AR/MC/MD models made
Sigma 14mm/3.5 for SR mount
Tamron SP 60B 300mm/2.8 (Adaptall)
Samyang T-S 24mm/3.5 (Nikon mount, DIY converted to SR mount)
Schneider-Kreuznach PC-Super-Angulon 28mm/2.8 (SR mount)
Bronica PS 35/40/50/65/80/110/135/150/180/200/250mm |
|
| Vissza az elejére |
|
 |
RokkorDoctor
 Csatlakozott: 2021.11.27. Szombat 15:19 Hozzászólások: 1562 Tartózkodási hely: Kent, UK
Expire: 2025-05-01
|
 Elküldve: Szer. Dec. 27, 2023 8:18 pm Hozzászólás témája: Re: How to store the photos? |
|
 Elküldve: Szer. Dec. 27, 2023 8:18 pm Hozzászólás témája: Re: How to store the photos? |
|
|
RokkorDoctor wrote:
| priyaleon62 írta: |
| Preserve your precious memories effortlessly! Safeguard photos by organizing them into digital albums or cloud storage services like Google Drive for easy access and protection against loss. Cherish moments, hassle-free. |
Sure, nice plug.
Third party cloud services (as opposed to an in-house cloud service architecture) generally DO NOT offer protection against loss of your data. Read their small print. They usually offer to take reasonable care of your data, but they do not guarantee backup, nor do they guarantee availability of any backups they do make. They cover only limited compensation for loss of data if any at all, and in their small print they almost always stipulate that backup of data is ultimately still the responsibility of the data end user. They explicitly ask you to agree to their TOC/EULA and thereby absolve them of any data safeguarding/backup guarantees or compensation for loss of data.
Think about it; if they really had to guarantee the safeguarding, backup, and instant availability of backups of your data, with compensation for loss of data, the potential losses for them would be practically unlimited. Those services would then be 20x more expensive than they are, if not more.
You can of course decide to use a cloud service as an extra off-site measure for data backup redundancy, which could be a wise move for non-sensitive data . But it should NEVER be your sole place of data storage/backup by assuming they are responsible to keep your data safe, private, and backed up.
Remember, when it comes to the definition of "reasonable care", you don't have the clout nor finances to drag them through the courts for a few years. The best you could hope for there would be a class action assuming you would be one of very many customers affected. And then they still have the TOC/EULA with your "signature"... _________________ Mark
SONY A7S, A7RII + dust-sealed modded Novoflex/Fotodiox/Rayqual MD-NEX adapters
Minolta SR-1, SRT-101/303, XD7/XD11, XGM, X700
Bronica SQAi
Ricoh GX100
Minolta majority of all Rokkor SR/AR/MC/MD models made
Sigma 14mm/3.5 for SR mount
Tamron SP 60B 300mm/2.8 (Adaptall)
Samyang T-S 24mm/3.5 (Nikon mount, DIY converted to SR mount)
Schneider-Kreuznach PC-Super-Angulon 28mm/2.8 (SR mount)
Bronica PS 35/40/50/65/80/110/135/150/180/200/250mm |
|
| Vissza az elejére |
|
 |
|
|