MFlenses - Új élet a digitális korban
MFLenses 2026

Manuális fókuszú objektívek fóruma

Fedezd fel a régi objektívek világát javítási jegyzetekkel, valódi tesztképekkel és képekkel teli archív témákkal.

Fedezd fel a régi objektívek világát javítási jegyzetekkel, valódi tesztképekkel és képekkel teli archív témákkal.
Reflektorfény

Kiemelt partneri hely a fórum nyitólapján.

Mount Identification Request
Előző téma megtekintése :: Következő téma megtekintése  


Reply

After checking lens mount identification pages on the internet, I still can't figure this one out. Can anyone here tell me which mount this is?

(Edit: replaced first photo)





#1


#2


#3


A hozzászólás legutóbb 55 által Vas. Aug. 17, 2025 11:27 am-kor lett szerkesztve, összesen 1 alkalommal.


Reply

Petri breech lock.


Reply

casualcollector írta:
Petri breech lock.


Thanks for the quick reply. My first thought was "Of course, I should've known it was Petri!". Perhaps the non-auto mount had confused me? But then I double checked and it seems this Sonnagar's mount is different from Petri.
It's a little narrower than the mount on Petri branded lenses I have. It wobbles and won't lock when I try to attach it to my Petri FT SLR or Petri to Sony E adapter.

Here's the Sonnagar compared to an actual Petri lens:



#1


A hozzászólás legutóbb 55 által Vas. Aug. 17, 2025 1:19 pm-kor lett szerkesztve, összesen 1 alkalommal.


Reply

Whatever mount it is, it is probably attached to a t2-mount.


Reply

The bare brass sections suggest the mount's been modified/remachined. Perhaps a not completely successful attempt to convert a different mount for use on a Petri body?


Reply

That lens is generally only available in Exakta or M42, I often search for Sonnagar just to see what's out there. I did one time buy a copy with Minolta SR mount, but it was clearly an adaptation, the entire mount was quite roughly fashioned from brass. This lens is fairly early, possibly Komura manufactured just going from the 'S' prefix. I wondered if it maybe Praktina mount, which is similar but it doesn't appear to be.


Reply

benadamx írta:
Alun Thomas írta:

(Sellers Pic)

One of the more attractively styled early Japanese SLR lenses, a Juplen 135/2.8 for M42, this can also be found as a Sonnagar brand lens. The serial number has an 'S' prefix, which I strongly suspect points to Komura as the manufacturer. Most copies of this lens I have seen are still in excellent condition.


I have the sonnagar version, in what sure looks to be petri bayonet mount but doesn't quite fit up to a petri body (but does fit my 3D-printed petri adapter)


Someone else has found a similar lens in the past also.


Reply

This lens is full of surprises. Smile

D1N0 írta:
Whatever mount it is, it is probably attached to a t2-mount.

It didn't occur to me it might be a T mount. It turns out it's not threaded on as T would be, but is held in place by three small screws.

BrianSVP írta:
The bare brass sections suggest the mount's been modified/remachined. Perhaps a not completely successful attempt to convert a different mount for use on a Petri body?

Yes, I wondered about the brass. I don't remember seeing a mount like that among my other lenses.

Alun Thomas írta:
That lens is generally only available in Exakta or M42, I often search for Sonnagar just to see what's out there. I did one time buy a copy with Minolta SR mount, but it was clearly an adaptation, the entire mount was quite roughly fashioned from brass. This lens is fairly early, possibly Komura manufactured just going from the 'S' prefix. I wondered if it maybe Praktina mount, which is similar but it doesn't appear to be.

Indeed, I have another Sonnagar copy of this lens in M42 mount. I wondered about Praktina mount, but I also thought it didn't quite match from images I found online. And, if I've measured correctly, my lens mount diameter is 49mm (see my first post). According to a reference site, Praktina mount diameter is 46mm:
https://www.graphics.cornell.edu/~westin/misc/mounts-by-register.html

The focus ring on this 135 doesn't reach the infinity mark. More than that, it seems to have been reassembled incorrectly because it's much shorter than my M42 copy.

#1





Using the mount from the M42 copy, I mounted the (shorter) lens on a Sony A7ii. As expected, it focuses far beyond infinity.
And the shorter 135's mount is lower profile than the M42.

#2




The brass mount's opening seems surprisingly small (28mm) to me for a 135mm f2.8 lens. I wondered if it was intended for a smaller than 35mm film format? Using a Canon EF to Sony E adapter, I held the 135 up against my Sony A7ii and didn't see any obvious mechanical vignetting with the black baffle in place. And I later found that the baffle unscrews.

#3


#4


Reply

Identifying a lens mount can be tricky, especially with older, less common systems like Praktina, Exakta, or M42. Knowing details like the serial number prefixes helps trace the maker—in this case, possibly Komura.
Geometry Dash


Reply

piokang írta:
Identifying a lens mount can be tricky, especially with older, less common systems like Praktina, Exakta, or M42. Knowing details like the serial number prefixes helps trace the maker—in this case, possibly Komura.
Geometry Dash


M42 is hardly 'less common' it's possible the most common mount in my hoard!
It's also very easy to confirm, with just a ruler/measure & a male thread item of 1mm or 0.75mm pitch all other threaded possibilities can be ruled out. even without these the only common mount that can't be ruled out with a quick glance is T2 (m42x0.75). There are threads like M44 which I probably would misidentify at a glance but they are much more unusual.


Reply

For that matter, Exakta is very common and pretty easy to identify as well. The obvious tipoffs are the narrow throat size and the placement of the stop screw. Variants like the Topcor version have their own tipoffs as well.

Praktina is really the only of the mentioned systems that's uncommon/not immediately obvious.

DConvert írta:
piokang írta:
Identifying a lens mount can be tricky, especially with older, less common systems like Praktina, Exakta, or M42. Knowing details like the serial number prefixes helps trace the maker—in this case, possibly Komura.
Geometry Dash


M42 is hardly 'less common' it's possible the most common mount in my hoard!
It's also very easy to confirm, with just a ruler/measure & a male thread item of 1mm or 0.75mm pitch all other threaded possibilities can be ruled out. even without these the only common mount that can't be ruled out with a quick glance is T2 (m42x0.75). There are threads like M44 which I probably would misidentify at a glance but they are much more unusual.