MFlenses - Új élet a digitális korban
MFLenses 2026

Manuális fókuszú objektívek fóruma

Fedezd fel a régi objektívek világát javítási jegyzetekkel, valódi tesztképekkel és képekkel teli archív témákkal.

Fedezd fel a régi objektívek világát javítási jegyzetekkel, valódi tesztképekkel és képekkel teli archív témákkal.
Reflektorfény

Kiemelt partneri hely a fórum nyitólapján.

Dead/Hot Pixel test Question
Előző téma megtekintése :: Következő téma megtekintése  


Reply

I did a pixel test tonight using software Dead Pixel Test, with setting hot:60 and dead:250.

Result shown on below picture:


For example, last line on the right note paper means ISO=100, shutter=30s, hot pixel=2, dead=74

I did ISO 100 test again (on the right note) at the last of the test to double check.

There is at least two zero dead pixel on each ISO for different shutter setting. I am understand this as no FIX dead pixel on the camera. Am I correct? If I am right why is it so? Is the way I did the test reliable?

Machine for test: Canon 60D and Pentax 50MM 1.4 SMC


Reply

f@tte írta:
I did a pixel test tonight using software Dead Pixel Test


when you see a hot pixel, try to run the "sensor manual cleaning mode" from camera menu on a 15-20 sec. (I dont remove a lens).
during the "manual cleaning" camera is remaping bad pixel on a sensor and will close them itself.
camera brain apparently interpolates neighboring pixels, IMHO its work on all canon cameras, try


Reply

fotkino írta:
f@tte írta:
I did a pixel test tonight using software Dead Pixel Test


when you see a hot pixel, try to run the "sensor manual cleaning mode" from camera menu on a 15-20 sec. (I dont remove a lens).
during the "manual cleaning" camera is remaping bad pixel on a sensor and will close them itself.
camera brain apparently interpolates neighboring pixels, IMHO its work on all canon cameras, try


I didn't realise that the camera is remaping bad pixel on the sensor in manual cleaning mode. Are you sure with it?

Anyway thank you for providing the info.

However it seems that for the same setting results are varied. It is hard to determine whether it gets improve or not?


Reply

f@tte írta:

I didn't realise that the camera is remaping bad pixel on the sensor in manual cleaning mode. Are you sure with it?

Anyway thank you for providing the info.

However it seems that for the same setting results are varied. It is hard to determine whether it gets improve or not?


Yes, im 100% sure Smile you can try this whith lens or whithout. Its a realy works with my 5D and 5DmkII.

And you can google "canon remaping hot pixel" and read about "manual cleaning mode" and remaping.


Reply

http://shmuliphoto.wordpress.com/2009/12/03/fix-hot-pixel-canon/


Reply

fotkino írta:
http://shmuliphoto.wordpress.com/2009/12/03/fix-hot-pixel-canon/

This is very helpful. Thank you!