MFlenses - Új élet a digitális korban
MFLenses 2026

Manuális fókuszú objektívek fóruma

Fedezd fel a régi objektívek világát javítási jegyzetekkel, valódi tesztképekkel és képekkel teli archív témákkal.

Fedezd fel a régi objektívek világát javítási jegyzetekkel, valódi tesztképekkel és képekkel teli archív témákkal.
Reflektorfény

Kiemelt partneri hely a fórum nyitólapján.

hopefully simple diffraction question
Előző téma megtekintése :: Következő téma megtekintése  


Reply

Is image softness from diffraction only a property of the digicam's sensor?

To put it in concrete terms my Canon rebel XS has a 1.6x crop sensor. Can I just assume that any aperture smaller then f8/f11 will have noticeable diffraction or should I test each lens?

Thanks!


Reply

Diffraction limit for a given sensor depends on its resolution + size.
http://www.luminous-landscape.com/essays/brick-wall.shtml

The lens itself also gives a diffraction, exactly, the aperture blades, when stopped down. That's why a lens don't perform better when heavily stopped Wink


Reply

Good links, thank you.


Reply

From the links:

Idézet:
ON REAL-WORLD USE IN PHOTOGRAPHY

Even when a camera system is near or just past its diffraction limit, other factors such as focus accuracy, motion blur and imperfect lenses are likely to be more significant. Softening due to diffraction only becomes a limiting factor for total sharpness when using a sturdy tripod, mirror lock-up and a very high quality lens.

Some diffraction is often ok if you are willing to sacrifice some sharpness at the focal plane, in exchange for a little better sharpness at the extremities of the depth of field. Alternatively, very small apertures may be required to achieve a long exposure where needed, such as to create motion blur in flowing water for waterfall photography. Diffraction is just something to be aware of when choosing your exposure settings, similar to how one would balance other trade-offs such as noise (ISO) vs shutter speed.


In other words, for handheld shooting, don't sweat it.


Reply

RioRico írta:
From the links:

Idézet:
ON REAL-WORLD USE IN PHOTOGRAPHY

Even when a camera system is near or just past its diffraction limit, other factors such as focus accuracy, motion blur and imperfect lenses are likely to be more significant. Softening due to diffraction only becomes a limiting factor for total sharpness when using a sturdy tripod, mirror lock-up and a very high quality lens.

Some diffraction is often ok if you are willing to sacrifice some sharpness at the focal plane, in exchange for a little better sharpness at the extremities of the depth of field. Alternatively, very small apertures may be required to achieve a long exposure where needed, such as to create motion blur in flowing water for waterfall photography. Diffraction is just something to be aware of when choosing your exposure settings, similar to how one would balance other trade-offs such as noise (ISO) vs shutter speed.


In other words, for handheld shooting, don't sweat it.


Hmmm, that in bold doesn't seem to fit with the rest of the text -- it is wrong, as shown by the rest of the text.


Reply

visualopsins írta:
RioRico írta:
From the links:

Idézet:
ON REAL-WORLD USE IN PHOTOGRAPHY

Even when a camera system is near or just past its diffraction limit, other factors such as focus accuracy, motion blur and imperfect lenses are likely to be more significant. Softening due to diffraction only becomes a limiting factor for total sharpness when using a sturdy tripod, mirror lock-up and a very high quality lens.

Some diffraction is often ok if you are willing to sacrifice some sharpness at the focal plane, in exchange for a little better sharpness at the extremities of the depth of field. Alternatively, very small apertures may be required to achieve a long exposure where needed, such as to create motion blur in flowing water for waterfall photography. Diffraction is just something to be aware of when choosing your exposure settings, similar to how one would balance other trade-offs such as noise (ISO) vs shutter speed.

In other words, for handheld shooting, don't sweat it.

Hmmm, that in bold doesn't seem to fit with the rest of the text -- it is wrong, as shown by the rest of the text.

I assume that the rest of the text refers to "using a sturdy tripod, mirror lock-up and a very high quality lens."


Reply

fuzzywuzzy írta:
Can I just assume that any aperture smaller then f8/f11 will have noticeable diffraction!


Yes, if you insist on pixel peeping all your pictures 'Very Happy'

Frankly, apart from all the real world factors already discussed that will obscure the diffraction effects, I don't see that pixel level sharpness is the most important thing in a picture.

An important consideration is the depth of focus you need. If this needs to be very large, then it is better to sacrifice ultimate sharpness in order to get more of the subject at an acceptable level of sharpness.

I do use f16 when the light is good enough when photographing motor sports since it gives more latitude for focusing error. And, with a moving subject, pixel level sharpness is not important since I want the car to look as if it is moving and not frozen.

So, it all depends on what you want in the picture.

Mark


Reply

SXR_Mark írta:
Yes, if you insist on pixel peeping all your pictures 'Very Happy'


Why must the best advice be the hardest to follow? Wink


Reply

fuzzywuzzy írta:
SXR_Mark írta:
Yes, if you insist on pixel peeping all your pictures 'Very Happy'

Why must the best advice be the hardest to follow? Wink

Because we humans be contrary beings.
Because we sometimes prefer trouble over ease.

I had an old friend, D. Maland, self-taught carpenter and self-professed Viking. He inherited his family's approach to projects, "the Maland Method". For instance, to add a basement to a house, they did not jack-up the house and excavate, no. They braced the house in place, crawled under it, and dug out by hand, framing as they went. Or, instead of building an inlay mosaic on a wood sheet and moving that into place when completed, he would jigsaw-puzzle it together on the the vertical wall, each piece hand-trimmed and glued. That task took weeks, not hours. The Maland Method: work too hard, too long, to achieve too little.

Thus, questions about sharpness. We may obsess over sharpness, over diffraction limits, over seeing some fuzziness at 400x magnification. We spend vast amounts of time and energy buying and testing and rejecting lenses. We forget what an image is to do -- it must COMMUNICATE. Many of the most influential and significant photos in history have been blurry fuzzy blobs that yet managed to convey drama and impact. But no, we use The Maland Method, and concentrate on details invisible to most, with energy expended for little return.

Perfect pictures of boring shit are still boring shit.


Reply

RioRico írta:
fuzzywuzzy írta:
SXR_Mark írta:
Yes, if you insist on pixel peeping all your pictures 'Very Happy'

Why must the best advice be the hardest to follow? Wink

Because we humans be contrary beings.
Because we sometimes prefer trouble over ease.

I had an old friend, D. Maland, self-taught carpenter and self-professed Viking. He inherited his family's approach to projects, "the Maland Method". For instance, to add a basement to a house, they did not jack-up the house and excavate, no. They braced the house in place, crawled under it, and dug out by hand, framing as they went. Or, instead of building an inlay mosaic on a wood sheet and moving that into place when completed, he would jigsaw-puzzle it together on the the vertical wall, each piece hand-trimmed and glued. That task took weeks, not hours. The Maland Method: work too hard, too long, to achieve too little.

Thus, questions about sharpness. We may obsess over sharpness, over diffraction limits, over seeing some fuzziness at 400x magnification. We spend vast amounts of time and energy buying and testing and rejecting lenses. We forget what an image is to do -- it must COMMUNICATE. Many of the most influential and significant photos in history have been blurry fuzzy blobs that yet managed to convey drama and impact. But no, we use The Maland Method, and concentrate on details invisible to most, with energy expended for little return.

Perfect pictures of boring shit are still boring shit.


Yeah, and perfect pictures of non-boring shit are way non-boring shit Laughing

That's what is desired, the equipment to make those perfect photos, given the other side of the equation cooperates.


Reply

fuzzywuzzy írta:
Is image softness from diffraction only a property of the digicam's sensor?


No, diffraction is a physical phenomenon:
http://en.wikipedia.org/wiki/Diffraction

_


Reply

Orio írta:
fuzzywuzzy írta:
Is image softness from diffraction only a property of the digicam's sensor?


No, diffraction is a physical phenomenon:
http://en.wikipedia.org/wiki/Diffraction

Here is a macro-physical analog of optical diffraction:

Turn on a garden hose or bathroom tap so a steady stream of water flows. Place your finger gently against the edge of that flow. Notice that water sprays away from your finger. Or keep your hands dry and use a knife-edge instead.

That spraying is essentially what happens with light when it hits the edge of an aperture -- photons spray off in odd directions, rather than staying with the main flow. That optical spraying is what causes image softness. The spraying is more noticeable on smaller frames/sensors than on larger frames. Thus large format cameras can go to f/64 or f/128 with no appreciable diffraction softness, while on an APS-C sensor the diffraction limit is around f/9.